Mutsy EVO - Assembly Instructions; Assembly Sequence; Orientation Guide; Unfolding the Frame

7
15. 5-point safety harness
16. hood
17. unfold lock
Assembly
Assembly sequence
· Unlock and unfold the frame
· Assemble the rear wheels
· Assemble the front wheels
· Place the carry cot or seat
Orientation
· References in the text to the front, rear, left or right side of the stroller
are described from the perspective of a user walking behind the stroller.
The frame
Unfold the frame (a, b)
· Push the frame lock inwards (a1) and move the top of the frame up-
wards until you hear a click (a2).
· Push the buttons on both sides of the push bar (b1) and turn the push
bar upwards (b2).
· The push bar has 4 dierent height positions. Release the buttons
when the push bar is in the desired position.
· Before use always check that the stroller has been unfolded and se-
cured correctly.
Fold the frame (d)
· Stand behind the frame and put the frame on the brake.
· Push the buttons on both sides of the push bar and turn the push bar
downwards until it has reached the lowest position (d1).
· This position is indicated by means of a marking on the hinge point.
· Pull the unlock buttons on the inner side of the frame towards you (d2)
and then push the top part of the frame downwards.
· The unfold lock will automatically lock when folding.
· The frame is folded in an extra compact way if you rst lock the swivel-
ling wheels before you fold (h).
The wheels
Assemble the rear wheels (e)
· Push the button and slide the axle of the rear wheel in the rear wheel
housing until you hear a click. Pull the wheel to check that it has been
attached rmly.