10
The seat (6 months – 25 kg)
· The seat is suitable for children from 6 months up to 25 kg who can
sit independently.
· The seat can be folded and unfolded with the frame and does there-
fore not need to be removed from the frame.
· The back support and leg support are adjustable.
· Make sure that the frame has fully been unfolded and the brake
blocked during all actions indicated below.
Place the seat (p, q)
· The seat can be placed on the frame in both directions.
· There are two foldable attachment points on both sides of the
frame. Make sure that the attachment points are in a vertical posi-
tion.
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock buttons above the attach-
ment points and push the seat downwards until you hear a click.
· Check that the seat has been attached solidly by trying to lift it from
the frame.
Remove the seat (r)
· Stand at the front side of the frame. Hold the seat on both sides at
the unlock buttons and pull the buttons upwards with your fingers.
The seat can vertically be removed from the attachment points.
Fold the frame with the seat directed forwards
· Stand behind the frame and make sure that the back support of the
seat is standing upright.
· Push the buttons on both sides of the push bar and turn the push
bar downwards until it has reached its lowest position.
· This position is indicated by means of a marking on the hinge point.
· Pull the unlock buttons on the inside of the frame towards you and
then push the top part of the frame downwards.
· Pull the button at the back of the seat upwards, hold this upwards
and tilt the back support of the seat backwards until it is fully flat.
· Push the buttons on both sides of the leg support and push the leg
support fully downwards.
Adjust the back support (s)
· Pull the button at the back of the seat upwards and hold it upwards.
· The back support has 4 positions. Place the back support in the de-
sired position and release the button to lock the position.