Mvision MVP195 User Manual

MOOD:MVISION
MVP195 Quickstart Guide
WELCOME TO MOOD!
This box contains everything you need to get started with digital signage.
CONTENTS
• Mood MVP195 x 1
• 5V Power Adapter x 1
• MVP195 Remote x 1
• AAA Battery x 2
• HDMI Cable x 1
• Network Cable x 1
MVP195 AT A GLANCE
USB THUMB DRIVE
moodmedia.com
POWER
BUTTON
HDMI OUT
RJ-45
DC POWER
AUDIO IN
MICRO SD CARD
SLOT
USB x 3 OTG
OPTICAL
AUDIO
AUDIO OUT
SETTING UP YOUR MVP195
When connecting your MVP195, please follow these steps in the order
listed below:
1. Insert the USB Thumb Drive
Your MVP195 should already have a USB Thumb Drive Inserted into
a USB port when you remove it from the box. If it does not, insert
the provided USB Thumb Drive into any of the USB 2.0 ports. The
USB Thumb Drive contains files that your player needs to operate.
Before attaching any cables, confirm that the USB Thumb Drive is
inserted into the player.
2. Connect the HDMI Cable
Connect one end of the included HDMI cable to the MVP195 and the
other end to your TV.
3. Connect the Ethernet or WiFi
If you are using a wired Ethernet connection, plug the Ehternet
cable into the Ethernet jack. If you are using WiFi, attach the
included WiFi Antenna to the player. For more information on how to
connect your device to WiFi, refer to the MVP Settings User Guide
4. Connect the Power
Connect the 5V power adapter to the MVP195 and plug the other
end into a wall outlet or power strip.
5. Turn on your TV and Select the Input
Turn on your TV and select the correct HDMI input. You should see
your content begin to play on the screen shortly.
• WiFi Antenna x 1
• USB Thumb Drive x 1
• Velcro Square x 1
*Actual USB device is subject to change

Mvision MVP195 Specifications

General

Brand	Mvision
Model	MVP195
Category	Amplifier
Language	English

Summary

Setting Up Your MVP195

Insert the USB Thumb Drive

Insert the provided USB Thumb Drive into any of the USB 2.0 ports.

Connect the HDMI Cable

Connect the HDMI cable to the MVP195 and the other end to your TV.

Connect Ethernet or WiFi

Connect Ethernet cable or attach WiFi Antenna for internet connection.

Connect the Power

Connect the 5V power adapter to the MVP195 and plug into a wall outlet.

Turn on TV and Select Input

Turn on the TV and select the correct HDMI input to view content.

Player and Accessory Information

USB Thumb Drive

Storage media containing necessary files for player operation.

Velcro Square

Industrial strength Velcro for mounting the MVP195 to surfaces.

HDMI Port

Port to connect the MVP195 to a TV using an HDMI cable.

Audio Out Port

Connect to speakers or TV's audio input for sound playback.

USB 2.0 Ports

Ports for USB flash drives, keyboards, and mice for content or service.

Ethernet Jack

Connect to an Ethernet cable for internet access and updates.

Optical Audio Port

Connect to an external sound processing unit via optical audio input.

Audio In and OTG Port

These connections are not used and should not be connected.

AC Power Port

Connect the 5V power adapter to this port for device power.

Power Button

Button to power the MVP195 on (2-3 sec) and off (8 sec).