FUNCTION KEYS
1. EARBUDS: Just place the earbuds into the
charging case. The earbuds will
automatically enter charging mode if the
cradle is charged or connected to the
power supply. The earbuds will display a red
LED light while they are charging, and
turn o when they are fully charged.
2. CASE: Use the cable provided to connect
the charging case to the power supply.
CHARGINGBLUETOOTH CONNECT
1. Power the device on. The earbuds will pair
with one another automatically when they
are turned on.
2. Turn on your device’s Bluetooth from the
Bluetooth menu and select “MV-EB5587”.
3. When paired successfully the device will
make a tone to confirm the connection has
been made to your device.
4. Remember to turn the earbuds o after each
use to ensure longest play time.
Note: The earbuds will reconnect automatically if your device has been paired previously.
Depending on your device’s type and configuration, manual reconnection may be
required each time.
Note: If you hold control button for 3 seconds earbuds will power down.
Take the two earbuds out of the charging
case. They will automatically turn on. Once
the earbuds have powered up, you should
hear a sound indicating that they have
automatically connected with one another.
TURN ON
WARNING: The artwork and design of this package are
protected by United States Copyright law and may not be
reproduced, distributed, displayed, published, or used for
any purpose without prior written permission. You may
not alter or remove any trademark or copyright notice
from this package. Because of continuous improvements,
images and product specifications on packaging may
dier slightly from actual product.
©2023 Argento SC, All Rights Reserved.
Distributed by Argento SC, New York, NY 10018.
Designed in New York. Made in China.
MVMT and MVMT logo are registered trademarks of
Argento SC. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Argento SC is under license.
www.argentosc.com
support@argentosc.com
Long press the control button until LED turns
red to indicate not in use, this will turn o your
device. Earbuds will turn o automatically if
away from case for more than 5 mins.
TURN OFF
1. PLAY/STOP MUSIC: When playing music,
quickly press either earbud’s control button.
2. VOLUME CONTROL: Adjust the volume via
your connected device (e.g. mobile phone).
3. ANSWERING CALL: When a call is received,
briefly press either earbud’s control button.
To hang up, briefly press once again.
4. DECLINING CALL: When playing music, press
and hold control button for 2 seconds*.
5. REDIAL: Double press the earbud’s control
button to dial the last number on your list.
FCC ID: 2A3ZO-EB5587
To Previous Page
Loading...
