EasyManua.ls Logo

Mx Onda MX-CDP2692 - FOLDING FRONT; CONTROL PANEL; Extractor hood on; off button and indicator; Low speed selector

Mx Onda MX-CDP2692
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
FOLDING FRONT
Before starting the extractor hood, you must open
the folding front, otherwise the evacuation and its
performance will be considerably reduced.
To open the folding front, hold it by the lower
corners and pull gently towards you, the shock
absorbers will facilitate the opening.
To close the folding front, hold it by the lower
corners and press the front towards the hood, at
all times you must hold the front, ensuring that it
does not hit the rubber buffers.
CONTROL PANEL
1. Extractor hood on / off button and indicator.
2. Low speed selector: Touching this button will cause the range hood motor
to run at low speed.
3. Medium speed selector: If you touch this button, the extractor hood motor
will run at medium speed.
4. High speed selector: Touch this button to make the range hood motor run at
full speed.
5. Analog clock (with jumps of 5 minutes).
6. Light on / off button.
7. Setting the clock and automatic switch-off timer.
2
1
5
6
7
3
4

Related product manuals