To Next PageTo Next Page
Need help?Do you have a question about the mxr Clone Looper M303 and is the answer not in the manual?
General| Type | Looper |
|---|---|
| Number of Loops | 1 |
| Maximum Loop Time | 6 minutes |
| Mono/Stereo | Mono |
| Input Impedance | 1 MΩ |
| Power Supply | 9V DC |
| Bypass | True Hardwire Bypass |
| Undo/Redo | Yes |
| Tempo Control | No |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Controls | Level |
| Footswitch | Record/Play/Overdub, Stop |
| Weight | 0.84 lb |
REC/DUB footswitch controls loop recording and clear loop functions.
VOLUME knob controls output level, loop speed, direction, and clear loop quietly.
PLAY/STOP footswitch controls loop playback and undo/redo functions.
CTR jack allows tap switch to control loop speed, direction, and clear loop quietly.
EXP jack allows expression pedal for volume or tap switch for Play Loop Once mode.
Connect the pedal and set all controls to 12 o'clock.
Record, layer, play loops, and use undo/redo functions.
Control volume, loop speed, and reverse playback using the VOLUME knob.
Clear loops quietly without playback interruption.
Use an expression pedal via the EXP jack to control loop volume.
Use a tap tempo switch via EXP jack for Play Loop Once mode.
Use a tap tempo switch via CTR jack for volume knob push functions.
Enable true bypass mode by holding the VOLUME knob during power-up.
