Unfold & assemble
Safety bar
Press the folding button (g. 1) and pull up on the handle to unfold the buggy un-
til you hear a click (g. 2). Make sure the buggy is locked in the fully open position
before using it (Fig. 3).
Attachment (Fig. 4):
Align the safety bar with the openings facing the seat unit and insert the bar into
the openings provided until it audibly clicks into place.
Removal (Fig. 5):
Press the buttons located on the right and left side of the safety bar and pull it
out.
1 2 3
4 5
Manual PICO
2
EN
To Next Page
Loading...
