Do you have a question about the MyCharge RAPID RECHARGE and is the answer not in the manual?
Allows the powerbank to recharge at the fastest rate possible through its integrated wall prongs.
Detects the connected device and charges it at maximum speed allowed by the device, shortening charge time.
Charges the powerbank and the device in parallel, providing both charged for extra power when needed.
Protects the powerbank and device against overcharging, undercharging, overtemperature, overcurrent, and short circuit for safety.
Maximizes power to your device by minimizing energy loss, keeping you powered longer.
Increases run-time between charges and makes the RAPID RECHARGE compact for its capacity.
Confirms full compatibility with virtually all smartphones via SmartSense™ technology.
Supports charging high-powered devices like tablets, eReaders, and GPS due to 2.4A output.
Provides steps to check power, recharge the unit, and verify cable connections if a device doesn't charge.
Explains solid vs. flashing LEDs during recharge, indicating current charge and remaining time.
Confirms pass-through charging capability for charging device and powerbank concurrently.
States the powerbank is capable of at least 500 charge cycles from empty to full.
Allows the powerbank to recharge at the fastest rate possible through its integrated wall prongs.
Detects the connected device and charges it at maximum speed allowed by the device, shortening charge time.
Charges the powerbank and the device in parallel, providing both charged for extra power when needed.
Protects the powerbank and device against overcharging, undercharging, overtemperature, overcurrent, and short circuit for safety.
Maximizes power to your device by minimizing energy loss, keeping you powered longer.
Increases run-time between charges and makes the RAPID RECHARGE compact for its capacity.
Confirms full compatibility with virtually all smartphones via SmartSense™ technology.
Supports charging high-powered devices like tablets, eReaders, and GPS due to 2.4A output.
Provides steps to check power, recharge the unit, and verify cable connections if a device doesn't charge.
Explains solid vs. flashing LEDs during recharge, indicating current charge and remaining time.
Confirms pass-through charging capability for charging device and powerbank concurrently.
States the powerbank is capable of at least 500 charge cycles from empty to full.
| Brand | MyCharge |
|---|---|
| Model | RAPID RECHARGE |
| Category | Battery Charger |
| Language | English |
Loading...