Quick
Set-up
Before you ride,
make sure your scooter
is correctly set up.
Mycle Quick Set Up Mycle Quick Set Up
8
9
After removing the scooter from
the box, place it on flat ground.
Open kick stand.
Connect the waterproof
cable between the handlebar
assembly and folding stem.
Insert the handlebar assembly
into the folding stem.
Lift the stem and lock
the folding safety lever.
Hearing a ‘click’ means
the stem is locked
in place.
Secure the handlebar assembly
to the folding stem with the
allen key and four screws
provided.
NOTE : First insert the four
screws in sequence from hole
to hole and finally tighten
them together.
Perform testing after installation
Power on inspection
Gear shift inspection
Front headlight inspection
Braking force inspection
1
2
3
4
5
Scooter Assembly
Power on testingHeadset assembly
1
2
3
4
1
2
3
4
To Next Page
Loading...
