?
FAQ
What do I do if my device is not working properly?
Reset the device and reinstall it. To reset your device, use a paper
clip to press and hold the recessed Reset button until the LED
turns solid red.
During installation, ensure that:
• your router is connected to the Internet and has Wi-Fi
enabled
• your mobile device is connected to your router’s Wi-Fi and
has Bluetooth enabled
• your mydlink device is in range of your Wi-Fi network
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google
Assistant. For setup instructions on these services, visit the
following websites:
Alexa:
dlink.com/en/alexa
The Google Assistant:
dlink.com/en/google-assistant
Mounting [Option 2] Mounting [Option 2]
1/
Place the camera against the
wall where you want it to be
positioned. Use a pencil to
make two marks where the
holes are located.
2/
Use a 6 mm drill bit to drill
two 26 mm deep holes over
the pencil marks.
3/
Hammer in the plastic wall
anchors to support the
screws.
4/
Align the camera mount’s
holes over the plastic anchors.
Drive the screws into the
anchors to secure the camera.
5/
Twist the camera head to
your desired position.
Quick Installation Guide
Full HD Outdoor Wi-Fi Spotlight
Camera with built-in Smart
Home Hub
DCS-8630LH
?
FAQ
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system
(FAT32) before it can be used with this product. This can be done
in the mydlink app by selecting the Format function in the
storage menu under the device settings.
What is Colour Night Vision and how does it work?
Colour Night Vision is enabled by default and allows you to see
colour images while viewing the live feed in low light scenarios.
To turn it off, select disable under the device settings page for
your camera.
Why does my device get so hot?
Heating of the exterior may occur if the spotlight is activated
for long periods of time. This may occur if the live-view is used
continuously for an extended period of time. Heating will not
cause damage, premature failure or safety issues.
Mounting [Option 1]
1/
Place the camera against the
pole where you want it to be
positioned.
2/
Thread the plastic mounting
ties through the slots on
the base of the device. Face
the rough side of the plastic
mounting ties to the pole to
avoid slippage.
3/
Fasten the plastic mounting
ties around the pole to
secure the camera.
2020/02/17 Ver 1.00(NA)_90x130
Support
©2020 All rights reserved. D-Link and the D-Link logo are registered trademarks
of D-Link Corporation or its subsidiaries. Product specification, size and shape are
subject to change without notice, and actual product appearance may differ from
that depicted on the package. Visit dlink.ca for more details.
Having trouble installing your new product? D-Link’s website
contains the latest user documentation and software updates
for D-Link products. Australian and New Zealand customers
can contact D-Link Technical Support through our website.
Australia:
Tel: 1300-700-100
24/7 Technical Support
Web: http://www.dlink.com.au
E-mail: support@dlink.com.au
New Zealand:
Tel: 0800-900-900
24/7 Technical Support
Web: http://www.dlink.co.nz
E-mail: support@dlink.co.nz
To Next Page
Need help?
General