Important information
Thank you for Purchasing the Light Switch Timer – Please
read the instructions to learn how to install and use your
new timer.
Whilst you will not be accessing or touching any wiring it
is advisable as a precaution to turn off the mains
electricity during installation of the cradle.
The Unit only works on standard type light switches.
It CAN NOT be used on Flat panel switches, Flush mount
switches or dimmer switches.
This unit operates using two fresh, high-quality AA
alkaline batteries
Batteries must be installed for unit to operate.
Use of rechargeable batteries means the low power
indicator may come on immediately.
Contents
Light switch timer unit, cradle, 3 control Wheels, 2 “n”
shaped plastic insert (in bag)
To Next Page
Loading...