What to do if there is no sound output from MYKESONIC Turntable speakers?
If you're not getting any sound, first, check that the volume isn't set too low. Also, make sure the input selector matches the device you're using for playback. Adjust the volume and select the correct input source.
Why is there noise/distortion in the sound output of my MYKESONIC Turntable?
Noise or distortion can occur if the unit is too close to a TV or another device that causes interference. Try turning off nearby TVs or appliances and moving the MYKESONIC Turntable to a different location.
What to do if MYKESONIC Turntable fails to respond?
If the unit isn't responding, it could be due to external factors like electrostatic discharge (ESD). Unplug the power cord and any external audio devices. Wait one minute, then plug the power cord back in.
How to fix a MYKESONIC Turntable that can't power on?
If your unit won't power on, the first thing to check is whether it's properly plugged in. Connect the DC power adapter to the jack.
To Next Page
General