Mylaps X2 Driver ID - Page 4

2
1
X2 DRIVER ID
USING YOUR X2 DRIVER ID
ON YOUR DASHBOARD
X2 Driver ID can be used by up to 5 users per
transponder. Press the button to change driver.
1 › 2
2 › 3
3 › 4
4 › 5
5 › 1
X2 Driver ID
X2 Driver ID
If LED panel shows ‘C’,
the communication
between the
transponder and
X2 Driver ID module
is interrupted
X2 Driver ID
X2 Driver ID
Press and hold the button until ‘B’
appears on the LED panel
Click the button to scroll through
the brightness options
Brightness will be set after releasing
the button for 2 seconds
ADJUSTING THE BRIGHTNESS
1.
2.
3.