Why Mylek MYMD1062 display shows the wrong metal type?
The display might not show the correct metal type for several reasons. There could be multiple targets in the search area, the target might be a metal the detector doesn't recognize, or the target is heavily oxidized. If the target is heavily oxidized, the detector might not display the correct metal type; this isn't a malfunction.
What to do if Mylek MYMD1062 displays false signals?
If your metal detector is displaying false signals, it could be due to sweeping the search coil too fast or at the wrong angle. Try sweeping the search coil more slowly and ensure you are holding the detector correctly. Also, the detector might show a false signal if it detects heavily oxidized metals. Try pinpointing the target from different angles; if the detector doesn't display the same signal each time, the target is probably heavily oxidized metal.
Connects earphones for private listening and battery saving.
Indicates the probable type of metal being detected by the detector.
Allows the detector's search coil to be used underwater.
Allows adjustment of the detector's length for comfortable use.
Guidelines for protecting hearing when using earphones with the detector.
Instructions on how to turn on the metal detector and set the volume.
Procedure for testing the detector's functionality indoors using sample objects.
Addresses false signals caused by sweeping speed, angle, or heavily oxidized metals.
Troubleshooting incorrect metal type indication due to multiple targets or oxidized metals.
Clarifies that this behavior is a normal function of the detector when finding metal.
Explanation of the symbol for proper disposal of electrical appliances.
General| Type | Metal Detector |
|---|---|
| Model | MYMD1062 |
| Operating Frequency | 6.5 kHz |
| Detection Depth | Up to 100cm |
| Search Coil Size | 25cm |
| Weight | 1.2 kg |
| Display Type | LCD |
| Battery Type | 6 x AA |
| Waterproof | Waterproof coil |
To Next Page