Need help?Do you have a question about the mylife MyF50L and is the answer not in the manual?
Details the placement and importance of the safety sign for spa users.
Outlines the spa owner's duty to ensure safety signage is posted.
Lists critical dangers like drowning, injury from fittings, and electric shock.
Advises caution regarding water temperature and chemical maintenance.
Emphasizes the necessity of following all provided instructions for safe operation.
Advises users to keep the safety instructions for future reference.
Explains hyperthermia, its symptoms, and risks of hot water immersion.
Notes that the spa is intended for outdoor use but can be installed indoors with precautions.
Provides key factors to consider when choosing the optimal location for the spa.
Lists acceptable materials and methods for spa support bases.
Specifics on where to locate a conduit for power wires under a concrete pad.
Guidance on routing the supply cable into the spa's equipment area.
Reiterates the importance of following all electrical connection directions.
Special attention regarding a specific fuse (Pico fuse) and its implications.
Emphasizes that electrical installation must be done by a qualified electrician.
Explains the typical North American GFCI and its importance.
Diagram illustrating the house breaker box and its GFCI connection.
Diagram showing front and bottom views of a G.F.C.I. breaker box.
Notes the requirement for a disconnect switch for servicing and maintenance.
Advises reading about keypad operation and setting the temperature.
Step-by-step guide to priming the spa pumps.
How to manually exit the priming mode.
Instructions for setting and adjusting the spa's water temperature.
Details the differences and functions of Ready and Rest heat modes.
Explains how to lock the entire control panel.
Explains how to lock temperature settings while allowing other features.
Setting start time and duration for main filtration cycles.
Allows manual testing of the GFCI to ensure proper function.
Accesses the GFCI Test Menu.
Describes the priming mode sequence upon power-up.
Indicates a potential freeze condition and system activation.
Indicates a pump stuck on, possibly causing overheating.
Reminder to regularly test the GFCI or RCD for reliability.
Outlines essential guidelines for spa installation and configuration.
Stresses the importance of GFCI or RCD protection for safety.
Warns against attempting service due to shock hazard and no user-serviceable parts.
Reference for BP Series systems user interface and programming.
How to adjust the spa's set temperature.
Controls heat modes: Ready, Rest, Circulation, Ready-in-Rest.
Step-by-step guide to priming the spa pumps.
How to manually exit the priming mode.
Describes the system's freeze protection mechanisms.
Setting start time and duration for main filtration cycles.
Steps to lock and unlock panel or settings.
Testing the GFCI for proper function.
Explains the GFCI test feature for verifying proper installation.
Outlines essential guidelines for spa installation and configuration.
Lists various health and safety warnings for spa use.
Stresses the importance of GFCI or RCD protection for safety.
Warns against attempting service due to shock hazard and no user-serviceable parts.
Step-by-step process for draining the spa.
Warns about potential damage from freezing due to power outages.
Provides procedures to prevent spa damage from freezing.
Addresses GFCI/RCD tripping during and after initial start-up.
Solves issues where the spa is completely unresponsive.
Resolves issues where jets do not activate when the pump key is pressed.
Resolves issues where LED lights do not activate.
Addresses issues with the air/water mixture from jets.
Warns that spa water must be chemically treated and maintained.
Guidance on sanitizing spa water for health and safety.
Periodic maintenance tasks for filters, covers, and temperature.
Essential safety tips for handling spa chemicals.
Importance of water balance and its effect on equipment and comfort.
Explains pH levels and how to adjust them for spa water.
Explains total alkalinity and its role in pH stability.
Explains calcium hardness and its desired range.
To Next Page
General