AHDM7/10
3. Press the "MENU" or "PIC MENU" button until "FM PRE-
SETS" is displayed. Select the preset location you would like to
save the desired channel at. Selecting the preset location is
accomplished by pressing the > button on your remote control or
pressing the "UP" button on the monitor. There are six preset
locations available. The previous entry in that location will be
overwritten.
4. To save the preset, press and hold the < button on your remote con-
trol or the "DOWN" button on the monitor for 3 seconds. The displayed
preset channel will change to reflect the selected channel to save as a
preset.
Note: Factory default presets: 88.1, 88.3, 88.7, 90.1, 91.3, 107.9MHz
To Next Page
Loading...
Need help?
General