AHDM7/ 9
1. Press the "MENU" button on the monitor or the "PIC MENU"
button on the remote control. Continue pressing the button and
scroll until "FM MOD" is button and scroll until "FM MOD" is dis-
played. Turn on the FM modulator by selecting "ON" by pressing
the "UP" or < button. The FM modulator feature will only be
available on the monitor with the media player in use.
2. Press the "MENU" or "PIC MENU" button until "FM CHANNEL" is
displayed. Select the channel you would like to use in the OSD menu.
You can select the desired frequency by pressing the "UP" or "DOWN"
buttons on the monitor or the < or > buttons on the remote control.
Tune your FM radio to the selected channel. If you would like to set
presets, continue to the next step.
FM PRESET INSTRUCTIONS
To Next Page
Loading...
Need help?
General