Myron & Davis NV8ACC1

To Next Page

Installation Instructions

http://www.myronanddavis.com

Honda Accord

NV8ACC1

INSTALLATION INSTRUCTIONS AND USE

The Myron & Davis In-Dash Navigation System includes

a built in DVD player that should not be viewed by the

driver while driving to avoid violation of State and Local

Laws. This product should be installed by a professional

to ensure proper installation and operation.

Myron & Davis is not responsible for any potential accidents,

property damage or bodily harm resulting from improper

installation or operation.

Need help?

Do you have a question about the Myron & Davis NV8ACC1 and is the answer not in the manual?

Summary

Installation Instructions and Use

System Overview and Safety

Details the Myron & Davis In-Dash Navigation System, including warnings about driver viewing while operating.

Ensure all appropriate materials are available

Caution

Battery Condition Check

Verify the vehicle battery is fully charged to ensure proper unit operation.

Warning

Vehicle Safety Precautions

Highlights ignition, battery disconnection, and airbag system safety, recommending certified technicians for malfunctions.

Removal Of The Dash Trim

Fastener Inspection During Trim Removal

Inspect all fasteners for damage during dash trim removal and replace as necessary.

Removal Of The OEM Radio

Pre-Installation Component Check

Inspect all fasteners and brackets for damage before commencing the installation process.

Satellite Radio, iPod interface and GPS Antenna

Antenna and Interface Placement

Mount GPS/Radio antenna externally and iPod interface connector internally for convenient user access.

Harness Routing for System Integrity

Route harnesses away from airbags and other safety systems to prevent damage or operational interference.

Connecting and installing the Myron & Davis unit

Brake Wire Connection for Video Safety

Connect the blue/white brake wire to the emergency brake switch for video lockout when the vehicle is in motion.

Wire Harness Management

Carefully route all wire harnesses to prevent them from being damaged during the installation.