MySmartBlinds AUTOMATION KIT

Questions and Answers

C
colemanandreaAug 3, 2025
What to do if MySmartBlinds AUTOMATION KIT app cannot find my blinds?
- A
  anthony03Aug 3, 2025
  If the MySmartBlinds app can't find your installed blinds, it might be due to several reasons. First, try turning the Bluetooth off and back on again on your device and restart the app. Ensure you are close enough to the blind with a clear line of sight. Also, try turning your smart device off and back on again. Check that the battery is connected to the motor box and switched to the ON position. Finally, turn the battery to the OFF position, wait at least 15 seconds, and then switch it back to the ON position.
R
Robert McdonaldAug 10, 2025
How to reset MySmartBlinds Window Blinds automation kit to pair with a different account?
- G
  Gerald SimonAug 10, 2025
  To reset your MySmartBlinds automation kit for pairing with a different account, turn the battery to the OFF position and wait at least 15 seconds. Then, pull on the manual switch, and while holding it, turn the battery to the ON position. Release the manual switch once the green light starts blinking. The green light will blink quickly to confirm the reset. Finally, pair and calibrate the blinds in the MySmartBlinds app.
B
bshahAug 15, 2025
Why won't MySmartBlinds AUTOMATION KIT Window Blinds properly calibrate?
- K
  kevinmcclureAug 15, 2025
  If your MySmartBlinds Window Blinds won’t properly calibrate, the headrail must be free of obstructions. Ensure that the barrels in the headrail are aligned and that nothing is preventing their rotation.
J
Jasmine HernandezAug 21, 2025
What to do if I can’t remove my existing MySmartBlinds AUTOMATION KIT Window Blinds?
- D
  David HarmonAug 21, 2025
  If you're having trouble removing your existing MySmartBlinds Window Blinds, you may need to use a scraper or screwdriver to gently pry the brackets open or remove any excess paint that may be keeping them shut.
R
rebecca75Aug 27, 2025
What to do if the motor box doesn’t fit inside my MySmartBlinds Window Blinds headrail?
- J
  James AlexanderAug 27, 2025
  If the motor box doesn't fit inside your MySmartBlinds Window Blinds headrail, it might be because some headrails are too shallow. Try inserting the bracket separately from the motor box and sliding the motor box into the bracket. Alternatively, you may need to insert the motor box without the bracket.