Need help?Do you have a question about the MZ 125 SM and is the answer not in the manual?
Provides critical safety rules for working on the vehicle, emphasizing attention and proper procedures.
Outlines general guidelines for performing repairs, including electrical safety and part handling.
Specifies recommended maintenance intervals for critical components like brakes and coolant.
Provides detailed specifications for dimensions, engine, camshafts, and tappet clearance.
Specifies torque values for critical chassis and engine fasteners to ensure safety and proper assembly.
Details front brake components, adjustment, fluid, caliper, pads, disc, wheel, bearing, and drive.
Covers compression pressure measurement and oil level checks.
Provides instructions for changing engine oil and filter, including environmental precautions.
Details the procedure for changing the oil filter and its function.
Provides detailed steps for removing the engine from the chassis.
Provides step-by-step instructions for removing the clutch assembly from the engine.
Covers valve removal, inspection of dimensions, and fine grinding procedures.
Explains how to adjust valve clearance using adjuster plates.
Covers cylinder removal, dimensions, piston removal, inspection, and installation.
Details the engine installation process, including cleaning, part replacement, and assembly.
Provides step-by-step instructions for removing the carburettor.
General| Transmission | 6-speed |
|---|---|
| Front Brakes | Single disc |
| Rear Brakes | Single disc |
| Fuel System | Carburetor |
| Front Suspension | Telescopic fork |
| Rear Suspension | Mono shock absorber |
| Frame Type | Steel perimeter frame |
To Next Page
