!
Read the operating manual carefully before you first drive. Please make sure you understand
every hint. If you have any questions or uncertainties, please contact with a dealer. This
manual does not contain all the information for each e-bike. A specialist dealer will be happy to
answer any questions that are not listed in this manual.
A. How to choose the right e-bike
1. Does your e-bike fit you? If your e-bike is too big or too small for you, you lose control and
could fall down.
2. Sit on different e-bikes gladly sample from a specialist dealer.
3. Is your seat height suitable for you? Adjust them accordingly.
4. Is the saddle fixed? The saddle should be firm.
5. How is the height for control unit and handlebar? You may need to adjust this.
6. Can you use the brake comfortably? If not, adjust the angle and distance to the handlebar.
7. Have you understood how to use your new e-bike? If not, you should contact a specialist
dealer. The dealer will clarify your questions and uncertainties.
B. General Safety Instructions
1. Before you leave, please use a suitable bike helmet. Wear and maintain your bike helmet
according to the instructions of the bicycle helmet manufacturer.
2. If you have all the safety equipment, you should learn and follow local laws and rights.
3. Do you know how to fix the gears? If the gears are not properly mounted, they will loosen,
and it can cause damage and death.
4. If you want to use different pedals, please learn how to use them. Special pedals require
special techniques to use.
5. If your bike frame is too small, it may interfere with driving. Please check the height.
6. Does your e-bike have shock absorbers? Use your shock absorbers only for the appropri-
ate application.
C. Safety information for checking the parts of bike
Please check your e-bike before driving: nuts, bolts, screws and other parts. Make sure that
all parts are correctly fixed and tightened.
Use appropriate tools such as: a nut wrench, a specialist dealer will also use such a tool. If
you are not sure, ask a dealer.
DANGER Proper tightening of nuts, bolts, screws and other parts is very important. If
there is too little or too much torque, the parts will not be properly fixed and will be damaged.
Make sure there are no loose parts. Check especially the gears, whether they are loose or not.
This can be more easily executed, before you ride the e-bike.
Wheels and gears: Make sure the wheels have the correct wheel pressure, place one hand
1. Introduction
2 3 4 5
6 7 8 9 10 11
12 13 14 15 16
17
18 19
20 21
22
23
24 25 26 27 28 29
30
To Next Page