Square HD
Product Overview
Installing the Battery and Memory Card
Connecting to an External Display
21003 Quick Start Guide
OPEN
6
4
3
2
1
12
7
5
8
9
10
11
micro SD
BATT
1 2
OPEN
00:07:38
Blink per 1 sec. while recording
PC
PC CAMERA
micro SD
BATT
Before you start using your camera, you need to
insert the included battery and a memory card (sold
separately).
1. Push the latch down to unlock the IO/battery cover.
2. Slide the IO/battery cover away from the device
and open the cover.
3. Insert the battery into the battery compartment,
observing the correct polarity.
4. With the gold contacts facing down, insert the
memory card into the memory card slot. Push the
memory card until it clicks into place.
5. Close the IO/batttery cover and push the latch
upwards to securely lock the cover.
NOTE: Use the USB cable to charge the battery.
To view the recorded files, connect this camera to
an external display (i.e. TV) using the HDMI cable as
shown in the illustration.
When connected, press the Power button
repeatedly to select the desired operation icon and
press the Shutter button to confirm the selection.
Select to play the video.
Select to view the previous file.
Select to view the next file.
Select to start the
slideshow.
Connecting to a Computer
To transfer the recorded files to a computer or use this device as a
webcam, connect this camera to a computer or notebook using the
USB cable as shown in the illustration.
When connected, press the Power button repeatedly the to select
the desired mode and press the Shutter button to confirm the
selection.
Select PC to transfer files.
Select PC CAMERA to use this device as a webcam.
Turning the Device On
Press and hold the Power button ( ) for 2 seconds
to turn on the camera.
Switching Modes
Press the Power button repeatedly to switch modes.
1. OLED Display
2. Shutter Button ( )
3. Buzzer
4. Lens
5. Microphone
6. Processing LED
7. Wi-Fi Button ( )
8. Power Button ( )
9. Power LED Indicator
10. Wi-Fi LED Indicator
11. Strap Eyelet
12. IO/Battery Cover
Animation Animation Animation Animation
Video mode Photo mode Photo Burst mode Time Lapse mode
Settings mode
After 1 sec. After 1 sec. After 1 sec. After 1 sec.
1080P60
52:38
238
8 MP
2383/1S
8 MP
2382S 2382S
8
MP
Names of Parts
Recording Videos
By default, the camera is automatically in Video mode
when turned on.
1. Press the Shutter button to start recording.
2. Press the Shutter button to stop recording.
Capturing Photos
1. Press the Power button to switch to Photo mode.
2. Press the Shutter button to take a photo.
NOTE: To view the recorded files, you have to transfer
those files to your computer first or connect your
camera to an external display.
Changing the Camera Settings
1. Press the Power button repeatedly to switch to Settings mode.
2. Press the Shutter button to enter Settings mode.
3. Press the Power button repeatedly to select the desired menu option.
4. Press the Shutter button to enter the submenu.
5. Press the Power button repeatedly to select the desired setting.
6. Press the Shutter button to confirm the selection.
NOTE: To return to Video mode, press and hold the Shutter button for 2 seconds.
Specifications
Image Sensor 8MP CMOS
Lens Fixed Focus Lens
OLED Display 128*36 (0.9 inch), Mono White
Memory microSD, microSDHC and
Image Resolution Video:
4K/15fps, 2.7K/30fps
1080p/60fps, 1080p/50fps
720p/120fps, 720p/100fps
Still image:
8MP, 6MP WIDE (16:9), 6MP
Wi-Fi 802.11 b/g/n
Waterproof IPX8 (10m)
Video Resolution menu Time Lapse menu Capture Settings
menu
Wireless Control menu Setup menuDelete menuExit
Video mode
8 MP 3/1sec. 2 sec.
SETUPOFFDELETEEXIT
1080P60
52:38
CAPTURE
SETTINGS
1080P-60FPS
Photo Resolution menu Photo Burst menu
Connecting to a Mobile Device
Select the SSID of this unit to connect this camera to your
mobile device.
1. Turn on the Wi-Fi function on your mobile device.
2. Select the camera's SSID (Wireless network name).
3. Enter the password to connect with your mobile device.
System Requirements
WINDOWS
Windows XP(SP2) or Vista and later
3.2GHz Pentium 4 or faster
DirectX 9.0c or later
Minimum 1GB of system RAM
Video card with minimum 256MB
of RAM
MACINTOSH
MAC OS X 10.4.11 or later
2.0GHz Intel Core Duo or faster
Minimum 1GB of system RAM
Video card with minimum 128MB
of RAM
NOTE: The default SSID and password settings are:
SSID: Nabi-actioncamera
Password: Ab123Cd45
Operating Temperature: -5 to 40 degrees Celsius
microSDXC memory card
up to 32GB. (Class 10 or higher)
To Next Page
Need help?
General