EasyManua.ls Logo

Nabtesco Symphony NK-6 - User Manual

Nabtesco Symphony NK-6
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NK6 Symphony Knee
Instruction Manual -
for Prosthetist
Distributeur

Questions and Answers

  • M
    maurice21Aug 11, 2025
    Why is my Nabtesco Symphony NK-6 making abnormal noises?
    • J
      Joann StoneAug 11, 2025
      Abnormal noise in your Nabtesco Medical Equipment can occur due to several reasons. First, check for any foreign objects caught in the moving parts and remove them. Another possible cause is missing parts, or deteriorated stanceflexion rubber. If the stanceflexion rubber is deteriorated, replace it.
  • M
    Marie ThomasAug 17, 2025
    What to do if the self-lock on my Nabtesco Medical Equipment is not released unintentionally?
    • D
      David ThomasAug 17, 2025
      If the self-lock on your Nabtesco Medical Equipment is not releasing unintentionally, it may be due to a few reasons. Ensure the user achieves a smooth heel-to-toe weight shift while walking, teaching them to place sufficient load on the toe when pushing off. Also, verify that the alignment is correct so body weight can be fully applied to the toe. Lastly, check if the stanceflexion rubber is too stiff and tighten the stanceflexion stiffness adjusting screw.
  • J
    Jerry MorrisonAug 22, 2025
    Why can't I activate the self-lock on my Nabtesco Symphony NK-6 Medical Equipment?
    • C
      calvinrollinsAug 22, 2025
      If you're unable to activate the self-lock on your Nabtesco Medical Equipment, even after adjusting the stanceflexion rubber, several factors could be at play. First, ensure that body weight is applied properly to the heel. If not, teach the user how to fully apply body weight to the heel. Next, check for proper alignment, adjusting it so that body weight can be fully applied to the heel. Finally, ensure that the foot is appropriate, selecting one with which body weight can be fully applied to the heel.
  • E
    eugene25Aug 29, 2025
    What to do if the selective lock cannot be activated on Nabtesco Medical Equipment?
    • J
      Jonathon RobinsonAug 29, 2025
      If the selective lock on your Nabtesco Medical Equipment cannot be activated, make sure the knee joint is fully extended when operating the switch. Also, ensure that the cosmetic foam cover is not caught.
  • L
    Lindsay JonesSep 4, 2025
    Why doesn't the joint fully extend on my Nabtesco Medical Equipment?
    • E
      Eric RodgersSep 4, 2025
      If the joint on your Nabtesco Medical Equipment does not fully extend before the heel contacts the ground, check if the adjusting valve (E) on the extension side of the hydraulic cylinder is not tightened excessively. If it is, loosen the adjusting valve (E) on the extension side.

Nabtesco Symphony NK-6 Specifications

General IconGeneral
BrandNabtesco
ModelSymphony NK-6
CategoryMedical Equipment
LanguageEnglish

Related product manuals