Do you have a question about the Nace TVR-AR324-8 and is the answer not in the manual?
Video Compression | H.264 |
---|---|
Hard Drive Capacity | Up to 6TB |
Operating System | Embedded Linux |
Resolution | 1080p |
Network Interface | RJ45 10/100Mbps |
Power Supply | DC 12V |
Details on FCC compliance, including conditions for device operation and potential interference issues.
Information regarding CE marking, compliance with EU directives (EMC, LVD, RoHS, WEEE), and battery disposal.
Statement confirming the device meets Industry Canada standards for digital apparatus.
Guidelines for installing the DVR, covering rack mounting, cable management, grounding, and environmental factors.
Steps for installing a hard disk drive (HDD), including pre-installation checks and connection procedures.
Instructions for connecting PTZ devices to the DVR via RS-485, including wiring details.
Procedure for correctly starting the DVR, emphasizing power supply and initial power-on sequence.
Guide to activating the DVR for the first time by setting an administrator password.
Instructions on how to set up and use a graphical unlock pattern for device login.
Steps for logging into the DVR system using the username and password.
Methods for logging out of the system, shutting down, or rebooting the DVR device.
How to check signal input status and configure 5 MP long distance transmission for cameras.
Procedure for adding network cameras to the DVR for live viewing and recording.
Configuration of network parameters essential for DVR operation and remote access.
Details on setting up general network parameters like IP address, subnet mask, and gateway.
Steps to enable and configure the Guarding Vision service for remote surveillance access.
Explanation of icons displayed in the Live View mode for monitoring camera status.
Instructions for starting recording, including options for continuous or motion detection recording.
Guide on how to play back recorded video files and pictures using various playback modes.