Nachi EZ-CFDL Series - Page 41

3.17Setting the “Playback speed limit”
3.17.2
How to change the
password
The password can be changed.
Setting procedure
1
Open <Constant Setting> - [3 Machine
Constant
s] [36 Playback speed
limit].
2
Touch the “New Password”.
3
Enter the Current password and the New
password.
- For the password, numbers of 8 digits
or less and “+” or
“-“ can be used.
- The initial setting (factory setting)
is “” (no password).
4
Press <Complete> to save t
he setting to the internal memory.
Table 3.17.2 Password change
Item
name
Description
Current
password
Enter
the
current
password.
The inputted numbers are displayed as “*”.
If this password is not correct, the password cannot be changed.
In case of
“no password”, leave this item
empty
.
New
password
Enter
the
new
password.
For the password, numbers of 8 digits or less and
“+” or “-“ can be
used.
In case of “no password”, leave this item empty.
IMPORTANT
If you forget the
password, it is impossible to release the protection. Please be
careful.
3.17.3
Playback mode
If the
“Playback speed limit” function”
is enabled, an ICON like the following picture will be
displayed while playing back a program.
3.17.4
Teach mode
If the
“Playback speed limit”
function is enabled, the manual operation speed is also limited.
(In this case, there is no
specific display)