Connect the PC and the LAN port of this robot controller using Ethernet cable.Connect the PC and the LAN port of this robot controller using Ethernet cable.
Both of cross cable and straight cable are Both of cross cable and straight cable are
of files using of files using
performed between performed between
rver and the rver and the
Operation is Operation is
at the FTP client to copy a at the FTP client to copy a
remote file into a local remote file into a local
computer and to copy a local file computer and to copy a local file
into a remote computer.into a remote computer.
There are following two methods to There are following two methods to
transfer files.transfer files.
This controllerThis controller
Files are transferred using the operation menu of this controller.Files are transferred using the operation menu of this controller.
This controller works as an FTP client (the node to start the FTPThis controller works as an FTP client (the node to start the FTP
requirement).requirement).
File transferFile transfer
This controllerThis controller
Files are transferred using FTP client software operating onFiles are transferred using FTP client software operating on
other nodes. This controller works as an FTP server (host).other nodes. This controller works as an FTP server (host).
File transferFile transfer
When this controller is the FTP server and when one or more FTP clientsWhen this controller is the FTP server and when one or more FTP clients
are connected, the icon shown right will be displayed to indicate theare connected, the icon shown right will be displayed to indicate the
connection. When the connection to the FTP server is disconnected, thisconnection. When the connection to the FTP server is disconnected, this
icon will disappear.icon will disappear.
To Next Page
Loading...