NAD 116 - Page 33

NA D
33
Phono Input
Input impedance (R and C) MM
MC
Input sensitivity MM
MC
Input overload at 20Hz/1kHz/20kHz
MM
MC
Signal/Noise ratio (A-weighted) MM
MC
THD (20Hz-20kHz) and IM dist.
RIAA response accuracy
Line Level Inputs
(CD,Video,Tuner,Tape 1, Tape 2, Aux)
Input impedance (R and C)
Input sensitivity ref.0.5V
ref. 2V
Signal/Noise ratio, A-weighted ref. 0.5V
ref. 2V
Frequency response, 20Hz-20kHz
Voltage gain
THD + SMPTE + IHF I.M.
Line Level Outputs
Output impedance Pre out
Tape
Headphones
Maximum output level Pre out
Tape
Phones
Physical Specifications
Dimensions in mm (Width x Height x Depth)
Net Weight
Shipping Weight
47 k + 200 pF
100 Ohms + 1000pF
1.2mV ref.0.5V
5mV ref. 2V
56µV ref. 0.5V out
240µVfor 2V out
20mV/200 mV/2000 mV
1.2mV/12 mV/90mV
78 dB ref. 0.5mV (cartidge connected)
78 dB ref. 0.5mV (100 load)
82dB with shorted input
<0.02%
±0.3dB
20 k + 450 pF
80 mV
300mV
98dB
108dB
±0.3dB
16dB
<0.02%
220
Source Z + 2k
120
>12V
>10V
>8V into 600
>250mV into 8
435 x 80 x 280
4.2kg
5.5kg
SPECIFICATION - NAD 116 STEREO PREAMPLIFIER