EasyManua.ls Logo

Nady Systems PMC-2X - User Manual

Nady Systems PMC-2X
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NADY PMC-2X
Driver-Passenger
Personal Motorcycle Communicator
OWNER’S MANUAL
NADY SYSTEMS, INC.
6701 Shellmound Street, Emeryville, CA USA 94608
Tel: 510/652-2411 Fax: 510/652-5075
www.nady.com
MOTORCYCLE
INTERCOM
FRS radio IN/OUT jack: Impedances 1k / 16 Ohms
PTT input jack: NO PTT SW
AUX input jack: Stereo L+R inputs 10 / 10 Ohms
Controls: High / Low Volume adjust
button, OFF / Intercom switch
Connectors: Passenger, Driver, Aux in, Ext. PTT,
2-way Radio (3.5mm TRS jacks); 5 VDC input,
3.5mm TS jack (TIP = NEG)
Audio Output to Headphone: 150mW / 16-32
Ohms
Headphone Impedance: 16 or 32 Ohms
Mic Impedance: 600 Ohms – Unidirectional
Electret Condenser
Housing Material: Cases and headset, both high
impact ABS plastic
Size: 4.0" x 2.75" x .65” (102 x 70 x 17 mm)
Weight: 3.1 oz. (79 grams)
Batteries: 3 AAA, 1.5V Batteries
PLEASE READ BEFORE USING YOUR PMC-2X
Before you connect your intercom earphone and mic, it is important to make sure that the metal
parts of the plug and jack are clean and dry, especially in cold weather. To prevent dirt or moisture
from damaging your intercom, always wipe the metal part of the plugs with a clean, dry cloth
before plugging in. We also suggest that you use a tuner cleaner spray (available at any electronics
supply store) to spray the plugs and jacks once a month to keep the contacts clean.
SERVICE FOR YOUR NADY COMMUNICATOR
(U.S.) Should your motorcycle communicator require service, please contact the Nady Service
Department via telephone at (510) 652-2411 or e-mail to service@nady.com for a Return
Authorization (R/A) Number and a service quote (if out of warranty). Make sure the R/A Number is
clearly marked on the outside of the package and enclose a cashier’s check or money order (if not
prepaid with a credit card). Ship the unit prepaid to: Nady Systems, Inc., Service Department, 6701
Shellmound Street, Emeryville, CA 94608. Include a brief description of the problems you are expe-
riencing.
The warranty card enclosed with this system contains additional valuable warranty and serv-
ice information. Keep it in a safe place for future possible reference. Do not attempt to service
this unit yourself as it will void the warranty.
(International) For service, please contact the Nady distributor in your country through the dealer
from whom you purchased this product.
Contact your dealer or Nady Systems for more information on our complete line of advanced
products for your motorcycle communication needs.
PMC-2X Specifications
Specifications subject to change without notice
PMC2X_manual 3/3/04 4:49 PM Page 1
Question and Answer IconNeed help?

Do you have a question about the Nady Systems PMC-2X and is the answer not in the manual?

Summary

Product Specifications

Electrical and Impedance Specs

Details headphone and microphone impedance requirements.

Physical Characteristics

Covers housing material, dimensions, and weight of the unit.

Power Source Requirements

Specifies the battery type and quantity needed for operation.

Specification Change Disclaimer

States that specifications are subject to change without prior notification.

Pre-Use Preparation and Care

Cleaning and Contact Maintenance

Guidance on cleaning metal parts and using tuner cleaner spray for optimal contacts.

Service and Support Information

Service Request and Handling

Instructions for contacting service, obtaining R/A numbers, and payment for repairs.

Warranty and Self-Repair Notice

Information on warranty coverage and a warning against attempting self-service.

Intercom and FRS Connection

Powering and Basic Operation

Instructions on battery installation and turning on the unit for intercom use.

Volume Adjustment

How to use volume buttons for clear, simultaneous two-way conversation.

External Audio Input

Connecting external sound sources like tape/CD players for audio playback.

FRS;GMRS;PMR Radio and Cellphone Setup

Connecting to 2-way radios or cell phones using optional cables and specific jacks.

External PTT Button Usage

Connecting and using the external push-to-talk button for radio transmission.

Radio Proximity Recommendation

Advice on maintaining a minimum distance between radio and PMC-2X for optimal performance.

Nady Systems PMC-2X Specifications

General IconGeneral
BrandNady Systems
ModelPMC-2X
CategoryIntercom System
LanguageEnglish

Related product manuals