Nagata TABLE TOP SCALE FAT-06 User Manual

WBG10B-SMD(1)
FAT08-RF6S10
ELECTRONIC WEIGHING SCALE
USER MANUAL
TABLE TOP SCALE SERIES
Item Number:
FAT-06
6 keys function
NAGATA
To deduct the weight of a container.
1
E
ns
u
r
e
that there is
no
weight
on
the weighing platform.2. Place an empty container on the scale platform. 3. Press TARE key to deduct the weight of the empty container.4. Place a weight in the container to obtain the net weight of the item.5. To clear the tare function, simply press the TARE key again.6. The Tare indicator light is on when the tare function is activated.7. The tare range is from capacity 0kg to the scale's maximum capacity.8. To review net weight or gross weight, press NW/GW key to display gross weight, when press NW/GW key again to display Net weight.
1.
Press
this key
to return
the display
to
a
zero
reading.
ZERO
ZERO
2.
TARE
TARE
3. 4.
1.While at tare mode, press NW/GW key to display net weight and gross weight value. 2. press NW/GW key lasting 3 seconds, scale will go into LED brightness
adjustment, use ZERO key to select brighter or darker, when press NW/GW
key again to confirm setup.
5.
Unit weight conversion. (Kg or lb)
MODE
6.
Prepare key.
(When perform Rs232 function to use as confirm key to send weight
data to computer)
Unit weight will be stored at next operation.
Key pad function:
ENTER
Press Hi/Lo key, when displays
Press
Hi/Lo key, when displays input
3.000
Press Hi/Lo key again, finished. (You may use ZERO(+) to increase value or NW/GW key to move)(Ex. To set high weight: 3.000kg, low weight: 1.200kg.)
Input 1.200
(
1
)
Preset
required high and low limited weight, when reaches the weight. There is a beep sound to warn the user.Note: 1. Hi/Lo key : to be confirmed key or skip .
2. NW/GW key: to be right movement key.
3. ZERO: to be value increasing key.
HI/LO
NW/GW

Nagata TABLE TOP SCALE FAT-06 Specifications

General

Capacity	6 kg
Readability	1 g
Auto Power Off	Yes
Tare Function	Yes
Overload Indication	Yes
Low Battery Indication	Yes
Power Supply	4 AA batteries

Summary

Before Operation

Stable Surface Placement

Ensure scale is placed on a stable surface for accurate readings.

Leveling the Scale

Adjust scale feet to center the bubble for proper leveling.

Environmental Considerations

Keep scale away from direct sunlight, heat, high temperatures, and damp conditions.

Scale Cleaning and Moisture

Prevent scale from getting wet and wash directly; wipe dry to maintain cleanliness.

Power Supply and Charging

Power Switch Location

Identifies the location of the power switch on the scale.

Charging and Battery Management

Details power supply, consumption, low battery indicator, and charging notes.

Keypad Functions

Zero Function

Pressing the ZERO key returns the display to a zero reading.

Tare Function

Deduct the weight of a container to obtain the net weight of an item.

High/Low Limit Function

Set and warn for required high and low weight limits with a beep.

Net/Gross Weight Display

Toggle display between net and gross weight; adjust brightness.

Unit Conversion Mode

Change unit weight between kg or lb.

Power On/Off Function

Turn the scale's power on or off.

Backlight Function Settings

Backlight Off Setting

Setting backlight mode to off by pressing TARE for 3 seconds.

Auto Backlight Setting

Setting backlight mode to auto by pressing HI/LO for 3 seconds.

Manual Backlight Setting

Setting backlight to manual by pressing MODE for 3 seconds.

Calibration Instructions

Calibration Test Weight Guidelines

Guidelines for selecting appropriate test weights for scale calibration.

Keypad Function Chart for Calibration

Visual guide to keypad functions used during the calibration process.

Calibration Procedure Steps 1-8

Detailed steps for initiating and setting up the scale calibration process.

Calibration Procedure Steps 9-10

Final steps for completing the scale calibration by matching test weight.