NAIM ALLAE - Specifications; SL2 Specifications; allæ Specifications; Intro 2 Specifications

11
Declaration of conformity to appropriate standards
Manufacturer
Naim Audio Limited, Southampton Road, Salisbury, England, SP1 2LN
Products
SL2, allæ, Intro 2, axent, axess
Safety
HD 195-S6
EN 60 065
EMC
Emissions Tested to: EN 55013 - Sound and television broadcast receivers and associated equipment
Immunity Tested to: EN55020 - Electromagnetic immunity of broadcast receivers and associated equipment
In accordance with: CISPR 16-1 - Radio disturbance and immunity measuring apparatus
CISPR 16-2 Methods of measurement of disturbances and immunity
IEC 801-2 8KV (air gap) 4KV (contact) (performance criterion B)
IEC 801-3 3V/m 20dB (performance criterion A)
IEC 801-4 1KV (AC lines) 0.5KV (signal lines) (performance criterion B)
Specifications
SL2
Frequency response: 30Hz - 20kHz ±3dB (in room)
Sensitivity: 89dB for 2.83V @ 1m
Nominal Impedance: 6 Ohms
Power Handling: 100 Watts (music programme)
Dimensions (H x W x D): 1030 x 282 x 330mm
allæ
Frequency response: 30Hz - 20kHz ±3dB (in room)
Sensitivity: 89dB for 2.83V @ 1m
Nominal Impedance: 6 Ohms
Power Handling: 100 Watts (music programme)
Dimensions (H x W x D): 928 x 288 x 288mm
Intro 2
Frequency response: 35Hz - 20kHz ±3dB (in room)
Sensitivity: 89dB for 2.83V @ 1m
Nominal Impedance: 6 Ohms
Power Handling: 75 Watts (music programme)
Dimensions (H x W x D): 873 x 240 x 276mm
axent
Frequency response: 40Hz - 20kHz ±3dB (in room)
Sensitivity: 89dB for 2.83V @ 1m
Nominal Impedance: 6 Ohms
Power Handling: 150 Watts (music programme)
Dimensions (H x W x D): 174 x 938 x 451mm
axess
Frequency response: 45Hz - 20kHz ±3dB (in room)
Sensitivity: 89dB for 2.83V @ 1m
Nominal Impedance: 6 Ohms
Power Handling: 100 Watts (music programme)
Dimensions (H x W x D): 174 x 536 x 451mm