DAC: digital to analogue conversion by Naim
iPod
Connect an iPod (generation 5 models and above)
to play its stored music or music streamed from your
network via UPnP over Wi-Fi.
iPhone
Connect an iPhone to play its stored music or music
streamed from your network via UPnP over Wi-Fi.
Games console
Connect a games console digital audio output to play
games audio.
DVD player
Connect a DVD player digital output for stereo
playback of DVD-A discs.
PC
Connect a PC external sound card digital output to
play stored or network music.
Mac
Connect a Mac digital output to play its stored music or
music streamed from your network via UPnP over Wi-Fi.
Hard Disk player
Connect a hard disk player or music server to play
stored or network music.
CD player
Connect a CD player digital output to play CDs.
TV
Connect a TV digital output to play TV audio.
Satellite TV receiver
Connect a set-top-box satellite TV receiver digital
output to play satellite TV audio.
Streaming device
Connect a music streaming device to play multi-room
streamed music.
USB stick
Connect a USB memory stick to play stored standard
or high resolution music.
Everything comes together
Connect to DAC
If exceptional music making is the first hallmark of
the Naim DAC, the second is versatility.
Versatility comes thanks to S/PDIF inputs that can
accommodate either optical or coaxial formats
and USB inputs that can accommodate memory
sticks and iPod and iPhone models. It arises also
from the numerous Naim system upgrades that
the DAC makes possible. Simultaneously with its
introduction, the CDX2 and CD5 XS CD players
have gained S/PDIF outputs and can now benefit
significantly from use with the DAC.
With the addition of a DAC, existing preamplifiers
can be incorporated into digital audio systems.
The Naim DAC can be controlled by a Naim
preamplifier remote control, seamlessly integrating
analogue and digital inputs across the two
units. The DAC becomes an extension of the
preamplifier. And when a USB stick, iPod or
iPhone is docked, the DAC front panel input
buttons transform to operate as playback controls.
NAIM AUDIO LIMITED
www.naimaudio.com
AUDIO OUTPUTS
Audio Outputs: 2 (RCA and DIN, selectable)
2.2V RMS
Frequency Response:
THD: <0.002%
INPUTS
Digital Inputs: )
USB: front and rear panel - the front overrides the rear
IR Input: front and rear panel
IR Output: rear panel socket
FORMATS
Audio files supported:
USB:
S/PDIF:
iPod, iPhone:
Supply Voltage:
Power Consumption:
Dimensions (mm):
Weight:
Colour: black
Finish: anodised fascia, painted cover
Specification
“Made for iPod” means th at an electron ic accessor y has been desi gned to connec t specificall y to iPod and has been certifi ed by the devel oper to meet A pple perform ance standard s. “Works with iPhone” means t hat
an electro nic accessory ha s been designed to con nect specifica lly to iPhone and has bee n certified by the deve loper to meet Apple pe rformance sta ndards. Apple is not re sponsible for the ope ration of this device o r its
complia nce with safety a nd regulatory sta ndards. iPod is a trad emark of Apple In c., registered in the U.S. a nd other countrie s. iPhone is a tradem ark of Apple Inc.
Cables play a part in the Naim DAC experience.
and RCA Phono options, is the perfect conduit for
connection to the DAC from any digital source.
To Next Page
Need help?
General
Weight and Dimensions
