NAIM Solstice - Solstice Series Power Supply NPX TT Features and Connections; Solstice Series Phono Stage NVC TT Features and Connections; Mains, Standby, and Brightness Settings; Signal Outputs and Cartridge Selection

7 8
4.2 Solstice Series Power Supply NPX TT
Features and Connections
USB
update
Brightness
/ Reset
WARNING: Disconnect
power before opening
FUSE RATING: ANTISURGE
11 20-120 V: T AL
220-240 V: T AL1
AC ONLY �
FREQUENCY: 0/60Hz5
I 60NPUT POWER: VA
Power
Power Supply Outputs
DESIGNED AND MADE IN
THE UK BY NAIM AUDIO,
SALISBURY, SP1 2LN
SOLSTICE
SERIES
POWER SUPPLY
NPX TT
S/No.
Type 2
Type 1
Refer to User Manual
Mains input
connection
Brightness toggle
and reset switch
Type 1 Power supply output
(for connection to Solstice
Series Phono Stage NVC TT)
Type 2 Power supply
output (for connection to
Solstice Turntable NVS TT)
4.3 Solstice Series Phono Stage NVC TT
Features and Connections
MC Cartridge
input
Switch to select
either MM or MC
cartridge input
MM Cartridge
input
Ground connection for
ARO tonearm interconnect
MC Cartridge
gain settings
RCA Audio output
(for connection to
amplifier)
Type 1 Power supply
input (from NPX TT)
5 pin DIN Audio output
(recommended for connection
to Naim amplifier)
Logo brightness
setting
Standby power
setting
4.4 Mains Connection
Connect the Solstice series Power Supply NPX TT to a mains power socket
using either the mains cable supplied or a Naim Power-Line.
4.5 Standby Power Settings
Both the NVS TT and NPX TT are set by default to power down into a sleep
mode after 20 minutes. In this sleep mode the vinyl replay system consumes
less than 0.5W of power. The ‘Instant On’ feature sets your vinyl replay system
to a mode that leaves the sensitive audio circuitry permanently powered for
the best sound quality. In the Solstice Special Edition vinyl replay system, set
the standby power setting switches to ‘Instant On’ on the NVS TT turnable
to enable this feature. The standby power setting on the NVC TT phono
stage is only applicable when the turntable and phono stage are powered by
independent power supplies.
4.6 Brightness Settings
The brightness of the product logos on the Solstice Special Edition vinyl replay
system can be adjusted per device using the switches on both NVS TT and
NVC TT and the push button on the NPX TT.
4.7 Signal Outputs
The Solstice Turntable arm interconnect cable is specic to the ARO tonearm
and features a unique 5 pin decoupled connection to reduce microphonic
eects. The Solstice Series Phono Stage features audio outputs on 5 pin DIN,
8 pin DIN and RCA outputs, making it easy to connect to a variety of Naim and
other manufacturers’ equipment. Always use high quality interconnect cables
to connect the phono stage to the amplier inputs. The Naim Super Lumina will
produce the best results. If connecting to a Naim amplier, a DIN connection is
recommended to give the best results.
Note: Solstice Special Edition features both
DIN and RCA outputs for connection to an
external amplier. Naim recommend DIN
connections.