Need help?Do you have a question about the NAIM SUPERUNITI - and is the answer not in the manual?
Audio Outputs| preamp output voltage | 775 mV |
|---|---|
| preamp output impedance | 22 Ω |
| preamp output load | 10 kΩ minimum |
Audio Performance| frequency response | 20 Hz - 50 kHz |
|---|---|
| signal to noise ratio | 80 dB |
| phase response | linear phase, absolute phase correct |
Power Output| power output into 8Ω | 80 WPC |
|---|---|
| power output into 4Ω | 120 WPC |
| quiescent power consumption | 35 Watts |
Inputs and Outputs| radio antenna input type | F type (plus PAL adaptor) |
|---|---|
| digital input sample rate coaxial | 192 kHz |
| digital input sample rate optical | 96 kHz |
Connectivity| wifi compatibility | 802.11b, 802.11g and 802.11n |
|---|---|
| ethernet | Yes |
| usb | Front panel socket |
Power| supply voltage | 100V, 115V or 230V, 50/60Hz |
|---|---|
| quiescent consumption | 35 Watts |
| upgrade interface | Rear panel mini-USB |
Weight and Dimensions| weight | 12.8 kg |
|---|---|
| dimensions | 87 x 432 x 314 mm |
| shipping weight | 15.5 kg |
Illustrates and labels the connection sockets on the SuperUniti rear panel.
Details the SuperUniti's digital, preamplifier, subwoofer, and headphone outputs.
Instructions for connecting the SuperUniti via Ethernet cable.
Instructions for connecting the SuperUniti to mains power.
Explains the connection of speakers to the SuperUniti rear panel.
Details connecting the SuperUniti wirelessly using the Wi-Fi antenna.
Details connecting the aerial for FM and DAB radio reception.
Lists and describes the various audio signal inputs and outputs.
Overview of the SuperUniti setup home menu with its eleven options.
Details settings for the DAB input, including rescan options.
Accesses system status, analyzes commands, clears presets, and resets settings.
Explains iRadio input settings like auto-disconnect and browse history.
Configures network parameters like name, wireless connection, and DHCP.
Allows changing input assignments and configuring navigation key functions.
Explains configuration parameters for internal and external inputs.
Details USB/iPod input settings like enabled status, folder history, and charge.
Guides on setting up a wireless network connection for the SuperUniti.
Configures settings for the FM input, including enabled status and seek lock.
Configures amplifier settings, including Amp Used, Max. Volume, and Balance.
To Next Page
