NAIM UnitiLite - Page 3

Full Naim streamer product installation and operational information can be found in the appropriate
Reference Manual available at: www.naimaudio.com/support/manuals.
Streamer Multiroom Supplement English
3.2 Server and Client Streamer Connection
With the multiroom input enabled the Setup menu will include a Rooms item. Selecting Rooms
will prompt the streamer to search for other streamers connected to the network with enabled
multiroom inputs. Selecting one of the streamers found by the search will nominate the current
streamer as the server (master) and the selected streamer as a client. The selected client
streamer will immediately switch to its multiroom input.
Once a client streamer is connected to the server streamer, audio playing via the server
streamer’s UPnP™, iRadio, or USB inputs will also play simultaneously via the client streamer. Up
to four client streamers can be selected simultaneously to play the server streamer audio.
To disconnect a client streamer at the server streamer, use the handset navigation keys to
select the desired connected client in the Rooms menu and press the handset ok/list key.
Note: Connected client streamers are identified by a tick mark alongside their names in the
Rooms menu.
To disconnect a client streamer locally, press the handset stop key or select an alternative
input. Re-connection of a client streamer can only be done by re-selecting it from the server
streamer Rooms menu.
Setup 3/10
Language
Inputs
4Rooms
Network Settings
Rooms 1/2
4aQute-3F65
Uniti-2E23
Note: Only 24bit/192kHz
capable streamers can
operate as both client and
server streamers. 24bit/192kHz
capable streamers are
identified by displaying
3DXXXXX in the “BC SW” line
of their System Status screen
(Setup > Factory Settings >
System Status).
24bit/96kHz streamers that
display 2DXXXXX in the “BC
SW” line of their System
Status screen can operate
as client streamers only.
Streamers that display either
2AXXXXX or 1AXXXXX in their
System Status screen cannot
operate as either client or
server streamers and must
be updated in order to
do so. Contact your local
Naim retailer or distributor
for information on streamer
updates.