Contents
Section Page
Contents
1 UnitiServe-SSD Hard Disk Player Introduction 1
1.1 UnitiServe-SSD User Interfaces 2
1.2 UnitiServe-SSD Interface Options 3
2 Getting Started 4
2.1 Internet/Network Connections 4
2.2 Power Supply Connection 4
2.3 Audio Connection 4
2.4 Switch On 4
2.5 External Screen Setup 5
2.6 First Use 5
2.7 Software Upgrade 5
2.8 Switching Off 5
2.9 Data Backup 5
3 Getting Connected 6
3.1 UnitiServe-SSD Rear Panel 6
3.2 UnitiServe-SSD Connections 6
4 The Display Interface 7
4.1 The Home Menu 7
4.2 The Browse Music Menu 8
4.3 The Find Music Menu 9
4.4 The Internet Radio Menu 9
4.5 The Current Playlist Screen 10
4.6 Playlists 11
4.7 The Quick Play Menu 12
4.8 The System Menu 12
4.9 Naim Server Remote Handset Functions 17
5 Playback 18
5.1 Local Playback 18
5.2 NaimNet Network Playback 18
5.3 UPnP™ Network Playback 18
6 Ripping 19
6.1 The Ripping Process 19
6.2 Copyright Issues 19
7 External Storage 20
7.1 USB Storage Devices 20
7.2 Network Shares 20
7.3 Music Stores 20
7.4 Adding a Music Store 21
8 Interface Menu Structure 23
9 Hard Disk Player Terminology 24
10 UnitiServe-SSD Specifications 26
11 User Notes 26
12 Commercial Acknowledgements 27
12.1 DigiFi End-user License Agreement 27
12.2 StreamNet Acknowledgement 27
12.3 Adobe Flash Acknowledgement 27
Note: This manual is issue No. 4 and describes the operation
of UnitiServe-SSD units running software release version 1.7a.
UnitiServe-SSD units running earlier software will not operate
fully in the manner described in this manual. The software
running in an UnitiServe-SSD is displayed in the System Status
menu.
To Next Page
Loading...
