Need help?Do you have a question about the Nakamichi PA-7 and is the answer not in the manual?
General| Power Output | 200 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Signal to Noise Ratio | 120dB |
| Input Sensitivity | 1V |
| Total Harmonic Distortion | 0.03% |
Details the voltage selection mechanism on the rear panel for different power inputs.
Lists part numbers for packing materials, owner's manuals, and power cords.
Provides an exploded view and parts list for the main unit assembly.
Details the left handle assembly and lists its constituent parts.
Details the right handle assembly and lists its constituent parts.
Lists the components and parts that make up the front panel assembly.
Outlines the necessary steps to prepare the unit before performing any electrical adjustments.
Provides the procedure for adjusting the DC balance on the speaker terminals.
Details the method for adjusting the idling current on the amplifier's PCB.
Presents the mounting diagram and parts list for the clipping LED printed circuit board assembly.
Presents the mounting diagram and parts list for the power LED printed circuit board assembly.
To Next Page
