Need help?Do you have a question about the Nakamichi ta-4e and is the answer not in the manual?
General| Input Sensitivity | 150mV (line) |
|---|---|
| Weight | 8.5kg |
| Type | Stereo Amplifier |
| Total Harmonic Distortion (THD) | 0.08% (20Hz-20kHz, 8 ohms) |
| Signal-to-Noise Ratio | 100dB (IHF-A) |
| Input Impedance | 47k ohms |
| Speaker load impedance | 4-16 ohms |
| Dimensions | 430 x 130 x 310 mm |
| Total Harmonic Distortion | 0.08% (20Hz-20kHz, 8 ohms) |
| Signal to noise ratio | 100dB (IHF-A) |
Procedures for removing the top and bottom covers of the unit.
Procedures for removing the front chassis and control/display PCB.
Procedure for removing the video and logic PCB assembly.
Electrical adjustments for the power amplifier section.
Electrical adjustments for the tuner section (FM/AM).
Overview of the unit's mechanism assembly.
Parts list and diagram for the front panel assembly.
Parts list and diagram for the front chassis assembly.
Parts list and diagram for the main chassis assembly.
Diagram and parts list for the power switch PCB assembly.
Diagram and parts list for the pin jack PCB assembly.
Diagram and parts list for the power indicator PCB assembly.
Diagram and parts list for the tone control PCB assembly.
Block diagrams illustrating the function of integrated circuits.
Detailed schematic diagram for the tuner section.
Detailed schematic diagram for the video and control section.
Detailed schematic diagram for the amplifier section.
Block diagram illustrating the operation of the tuner section.
Block diagram illustrating the operation of the amplifier section.
Technical specifications for the power amplifier section.
Technical specifications for the preamplifier section.
Technical specifications for the tuner section (FM/AM).
To Next Page
