Need help?Do you have a question about the Nakamichi AVP1 and is the answer not in the manual?
Key features and capabilities of the Nakamichi AVP1 amplifier.
Detailed overview of the Nakamichi AVP1 amplifier, including front panel components.
Input for a 12V signal to power ON the AVP1, typically from a connected device.
Seven channels of audio output ports for connecting to system speakers with correct polarity.
Seven channels of analogue, balanced audio input ports for connecting to a processor.
Seven channels of analogue audio input ports for connecting to a processor.
Guidance on connecting the amplifier to a processor and speakers, including polarity.
Diagram and advice for optimal placement of 7.1 speaker configurations.
Placement guidelines for front speakers to create sound effects and a sound field.
Placement recommendations for the centre speaker, often used for dialogue.
Information on subwoofer placement and its effect on bass quality.
Placement advice for surround and back surround speakers for immersive audio.
Explanation of the trigger input for remote power control, typically with AV1.
Connection for synchronizing front panel lighting and logo brightness with AV1.
Steps for powering on the unit, manual vs. trigger operation, and LED indicators.
Details on power gain, input sensitivity, power output, SNR, and frequency response.
Information on power requirements, consumption, standby power, and physical dimensions.
Steps to verify power source and rear panel switch for no power issues.
Troubleshooting steps for lack of audio, checking MUTE, volume, interconnections, and switches.
To Next Page
General
