Need help?Do you have a question about the Nakamichi 620 and is the answer not in the manual?
Power| voltage | 100/120/220/240 V AC |
|---|---|
| frequency | 50/60 Hz |
| power consumption at idling | 50 VA |
| power consumption with both channels driven | 700 VA |
| power output | 100 Watts per channel |
| IHF power bandwidth | 5—50, 000 Hz |
Performance| total harmonic distortion at 1 KHz | Less than 0.002% |
|---|---|
| total harmonic distortion at 10 KHz | Less than 0.005% |
| intermodulation distortion | Less than 0.002% |
| frequency response | 5 — 100, 000 Hz +0, -1 dB |
| signal-to-noise ratio | Better than 120 dB |
| crosstalk | Better than -70 dB @ 1 KHz |
Physical Characteristics| dimensions | 15.75" (W) x 7.44" (H) x 9.76" (D) |
|---|---|
| dimensions in mm | 400 mm (W) x 189 mm (H) x 248 mm (D) |
| weight | 27.6 Ib |
| weight in kg | 12.5 kg |
Important safety warnings regarding capacitor discharge and handling.
Details on power supply, pre-stage, and output stage amplifier configurations.
Circuit operation for peak power indicators based on output levels.
Steps for removing cabinet, panels, jacks, PCBs, and internal components.
Guidelines for wiring, grounding, balance, distortion, and oscillation issues.
Detailed diagrams and parts lists for Power Block, Output, Indicator, and Mechanism assemblies.
Explains the addition of a protector circuit to prevent speaker damage from DC voltage.
Details parts, modification steps, wiring, and mounting for the protector circuit.
Covers operational timing, potential issues, and countermeasures for the protector circuit.
To Next Page
