Need help?Do you have a question about the Nakamichi RE-2 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Tuning range | FM, MW |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω (minimum) |
| Total Harmonic Distortion | 0.08% |
| Signal-to-Noise Ratio | 95dB (line) |
Details the product code and geographic service destinations.
Covers safety notices, leakage checks, and battery handling procedures.
Illustrates the unit's packaging and included accessories.
Details the synthesis mechanism components and their part numbers.
Provides the exploded view diagram of the main chassis assembly.
Details the front chassis assembly and its constituent parts.
Presents the diagram and parts list for the heat sink assembly.
Diagram showing the AC outlet printed circuit board.
Diagram showing the power switch printed circuit board.
Diagram showing the headphone printed circuit board.
Diagram showing the treble control printed circuit board.
Diagram showing the bass control printed circuit board.
Diagram showing the balance control printed circuit board.
Diagram showing the volume LED printed circuit board.
Diagram showing the loudness control printed circuit board.
Diagram showing the motor volume control printed circuit board.
Diagram showing the speaker selector printed circuit board.
Diagram showing the record selector printed circuit board.
Diagram showing the speaker terminal printed circuit board.
Diagram showing the power supply printed circuit board.
Diagram showing the front panel printed circuit board.
Diagram showing the system remote printed circuit board.
Diagram showing the main printed circuit board.
To Next Page
