Do you have a question about the Nakamichi SR-3 and is the answer not in the manual?
Power Output | 50 watts per channel into 8Ω (stereo) |
---|---|
Tuning range | FM, MW |
Output | 150mV (line) |
Input Sensitivity | 2.5mV (MM), 150mV (line) |
Signal-to-Noise Ratio | 80dB (MM), 95dB (line) |
Speaker load impedance | 8Ω to 16Ω |
Channel separation | 50dB (1kHz) |
Details on the receiver's protection circuits that prevent damage from overload or faults.
Guide to tuning in FM and AM broadcasts using automatic and manual modes.
Detailed technical specifications for the power amplifier section of the receiver.
Technical data for the FM and AM tuner sections, including sensitivity and frequency response.
Technical specifications for the preamplifier section, covering input sensitivity, impedance, and RIAA deviation.
Common audio issues and their probable causes and remedies, including no sound or channel problems.
Solutions for common tuner reception problems like poor reception or tuning issues.