Need help?Do you have a question about the NAKTO Camel MB and is the answer not in the manual?
Unpack all bike components from the box, separating them from protective materials.
Attach the front wheel to the fork, ensuring proper alignment and brake cable connection.
Insert and secure the handlebar stem into the frame's steerer tube.
Mount the front fender and headlight assembly onto the fork.
Properly adjust brake pads and cable tension for safe and effective braking.
Insert and secure the seat post into the frame for rider comfort.
Correctly attach the left and right pedals to the crank arms.
Mount the front basket onto the bike's frame using the provided hardware.
Inflate tires to the recommended pressure for optimal performance and safety.
Ensure the battery is fully charged and securely locked to the frame.
Verify that all critical hardware is tightened to the specified torque for safety.
Guide to powering on the ebike, including key insertion and battery lock.
Explanation of the battery key's functions and positions (ON/OFF).
How to engage the Pedal Assist System (PAS) using the handlebar control.
Instructions for activating the ebike's headlight.
Guidance on operating the twist throttle for motor assistance.
How to use the brakes and their motor disengagement safety feature.
Procedure to turn off the Pedal Assist System (PAS).
Steps to turn off the battery and remove the key when parking.
General| Type | Electric Bicycle |
|---|---|
| Battery | 36V 10Ah lithium battery |
| Max Load | 250 lbs |
| Charging Time | 4-6 hours |
| Motor | 250W |
| Frame Material | Carbon Steel |
| Brakes | Front V-brake and rear expansion brake |
| Tires | 26" |
| Gears | 6-speed |
| Max Speed | 20 mph |
| Display | LED |
To Next Page
