Need help?Do you have a question about the NAKTO Elegance and is the answer not in the manual?
Lists both provided and needed tools for ebike assembly.
Instructions for unpacking, identifying all included parts, and noting the spare fuse.
Loosening axle nuts, disconnecting brake cable, and guiding the wheel into the fork.
Aligning lock washers, tightening axle nuts, and ensuring wheel alignment.
Installing axle nut caps and reconnecting the brake cable.
Inserting, adjusting height, aligning, and tightening the handlebar stem.
Securing the handlebar stem with the supplied allen wrench.
Testing handlebar and front wheel alignment for security.
Removing mounting bolt, positioning fender, and attaching headlight and fender to fork.
Attaching fender mounting arms and adjusting headlight angle for optimal illumination.
Warning about brake adjustment complexity; adjusting brake pads to the rim.
Correctly positioning pads, and reconnecting the brake cable.
Connecting the brake cable, adjusting barrel adjusters, and securing with a pinch bolt.
Adjusting pad clearance and centering using barrel adjusters and spring tension.
Inserting, adjusting height, and securing the seat post with the quick-release lever.
Identifying left/right pedals and threading them into crank arms.
Final tightening of pedals using the provided wrench.
Unlocking, placing, and locking the rear cushion onto the carrier.
Notice about separate shipping; installing the first basket bracket to the front wheel axle.
Re-tightening axle nuts and installing protective caps for the bracket.
Connecting the basket to the mount extending from the handlebars.
Securing the basket to the bottom bracket using provided hardware.
Snapping the basket cover into place and inflating tires to recommended pressure.
Table detailing specific torque values for various bike components.
Explanation of PAS, twist throttle, and throttle warnings.
Steps to turn on the ebike, including key and battery positions.
Sitting on the bike, turning on the electrical system and headlight.
Choosing PAS level, starting to ride using PAS or throttle.
Proper throttle use, braking, turning off the system, and parking.
Advising protective gear and adherence to traffic laws.
Recommending safe charging practices and pre-ride safety checks.
Considerations for passenger safety, baggage, and riding in adverse conditions.
General| Brakes | Front V brake, rear expansion brake |
|---|---|
| Battery | 36V 10Ah lithium battery |
| Charging time | 4-6 hours |
| Range | 20-25 miles |
| Pedal Assist | Yes |
| Throttle | Yes |
| Color Options | White, Black |
| Motor | 250W |
| Display | LED |
| Suspension | Front Suspension Fork |
| Gearing | 6-speed |
To Next Page
