Home
N&W Global Vending
Vending machines
Snakky
N&W Global Vending Snakky Quick Reference Guide
23 pages
Manual
Specs
Ask a question
To Next Page
To Next Page
Loading...
Quick Reference Guides
2
Table of Contents
Programming Instruction Manual
2
CONTENTS
2
Colibri
2
Kikko
2
Piccolo Mattino
2
Gran Mattino
2
5100
2
5300
2
Snakky
2
Spazio P
2
Spazio LX (round door)
2
Spazio
2
Zenith
2
Spring & Dual
2
Smart
2
Starfood
2
Zeta
2
COLIBRI Quick Reference Guide
4
Open Door
4
------------------------------------------------------------------------------------------------------------------------------
4
Reset Failures
4
Press program button twice, (Present Failures)
4
Press button 6 and faults will be displayed or press button 8 to reset faults.
4
------------------------------------------------------------------------------------------------------------------------------------------
4
Statistics
4
Press the program button once, (Statistics).
4
Press button 6 (Statistics Display)
4
Press button 6 (button 1 P= 00000) Scroll between P=PAY G=GRATIS/FREE T=TEST ------------------------------------------------------------------------------------------------------------------------------------------
4
Set Prices
4
Press the program button twice, (Present Faults) scroll to (Set Prices).
4
Press button 6 (Price 1=0010) (if price one is set to 0000 the machine will be set to free vend).
4
Press change data (Price 1=0000 FLASHING).
4
Press button 6 to confirm price change.
4
Set Price/Buttons
4
Press button 6 (Set Price/Selection).
4
Press button 6 (button 1=ON)
4
Press button 6 (Price 1).
4
Press button 7 (price 1 flashing) a price can now be selected (from 1-8) from the set prices menu. `
4
In programming mode the Colibri buttons have the following functions:
4
1Scroll up/increase data
4
1 5
4
2 Exit function/cancel change
4
5 Scroll Down/decrease data 2 6
4
6 Enter button/confirm change
4
3 7
4
7 Change data item
4
8 Reset Failures Button 4 8
4
To exit the program power the machine down
4
Kikko Quick Reference Guide
5
Open Door
5
(-) scroll scroll (+)
5
EnterExit
5
Statistics
5
Press program button once (Statistics).
5
Press enter, scroll to (display statistics).
5
Press enter (Dis Sel Count).
5
Press enter (Single count). Scroll to (Total count) and press enter.
5
Press enter, scroll through each selection taking readings.
5
------------------------------------------------------------------------------------------------------------------------------------------
5
Failures
5
Press the program button once.
5
Press Exit button, (Failures).
5
Press enter (Read Failures) Press enter to read.
5
Then scroll to reset failures.
5
Press enter to reset any failures.
5
-------------------------------------------------------------------------------------------------------------------------------------------
5
Prices
5
Press the program button once (Statistics).
5
Press Exit (Present Failures) Scroll to (set parameters).
5
Press enter (cash).
5
Press enter scroll to (single price).
5
Press enter (Price Band 0)(0= being the normal price band).
5
Press enter price flashing.
5
Change price and press enter to confirm change. Press the program button to exit the program BRIO 250 Quick Reference Guide
5
Open Door
6
Present failures
6
Press program button twice. (present failures).
6
Press button 2 to read any faults,
6
To reset any problems press button number 4
6
------------------------------------------------------------------------------------------------------------------------------------------
6
Set Prices
6
Press the program button twice (Present Failures) press + (Set Prices).
6
Press button 2 (Price 1=0010) (if price one is set to 0000 the machine will be set to free vend).
6
Press button 3 and select the correct price.
6
Press button 2 to confirm change.
6
Set Price/Select
6
Press the program button twice (Set Price/Selection).
6
Press button 2 (Button 1= A)
6
Press button 2 (price 1),
6
Press Button 3 scroll to the required price (1-8).
6
Press button 2.
6
Statistics
6
Press program twice (Present Faults).
6
Press button 8 to display Statistics,
6
Use the + or - buttons to take the readings required.
6
P = Pay G = Gratis/Free T = Test
6
The selection buttons on the front have the following direct functions
6
EXIT
6
ENTER
6
CHANGE DATA
6
RESET FAILURES
6
INSTALLATION
6
RESET STATISTICS
6
PRINT STATISTICS
6
DISPLAY STATISTICS
6
To exit the program Power machine down
6
PICCOLO MATTINO Quick Reference Guide
7
Open Door
7
A=Change data
7
B=Previous function or increase data
7
C=Next function or decrease data
7
D=Delete data or exit function
7
E=Confirm data or confirm function
7
With Present Faults on the display, the buttons indicated above are assigned direct functions.
7
Present Failures
7
Press button A twice in quick succession (Password and enter 1111)(Maintenance).
7
Press button C (Programming)
7
Press button E (Present Faults).
7
Press button E to read or reset button to clear.
7
-------------------------------------------------------------------------------------------------------------------------------------------
7
Statistics
7
Press button A twice in quick succession (Password enters 11111)(Maintenance)
7
Press C (Programming)
7
Press E (Present Failures)
7
Press the Display Stats button (Statistics 1)
7
Press C to scroll through selections
7
Impresso Duo Quick Reference Guide
8
Open Door
8
p
8
J
8
S
8
Statistics
8
Enter the following password 55555 (Washing)
8
Press button P (View Counters)
8
Press button 8 (Total = XXXX)
8
GRAN MATTINO Quick Reference Guide
9
A=Change data 1 = Coffee Boiler Installation
9
B=Previous function or Scroll up 2 = Reset Failures
9
C=Next function or Scroll down 3 = Reset Statistics
9
D=Delete data or exit function5 = Display Statistics
9
E=Confirm data or confirm function6 = Print Statistics
9
Reset Failures
9
Press button A twice in quick succession (Password = 11111)(Maintenance).
9
Scroll to Programation and press button E (Powder Dose).
9
Press button 2 to reset failures.
9
-------------------------------------------------------------------------------------------------------------------------------------------
9
Statistics
9
Press button A twice in quick succession (Password = 11111)(Maintenance).
9
Scroll to Programation and press button E (Powder Doses).
9
Press button 5 to display Statistics.
9
-------------------------------------------------------------------------------------------------------------------------------------------
9
Set Prices
9
Press button A twice in quick succession (Maintenance).
9
Press B (Programation) and press E (Powder Dose).
9
Press B (Set Price).
9
Press E (Price 1=0010) (if price 1 is set to 0000 the machine will be set to free vend).
9
Press A and use button B to select the correct price and press E.
9
Set Price/Select
9
Scroll to Set Price/Selection.
9
Press E (Button 1= ON)(Scroll 1-12).
9
Press E (price 1=0010? Flashing)
9
Scroll to price required, press E.
9
5100 Quick Reference Guide
10
The four pre-selection buttons (at the top of the selection panel) are used to activate the menus and their options:
10
Statistics
10
Open the machine door (Total Count Menu)(NRES TOT: XXX = Non resetable) (RES TOT:XXX = Resetable).
10
To reset counters press the down button 4 times then step right once, press the Increase button to reset the data.
10
The display will then return to Total Counters.
10
Brewer Rinse
10
Open main door (total sales).
10
Press the step right button until the display shows Rinse down. Press down (brewer/Mixer.
10
Press step right and close door.
10
Press the ( button and follow the instructions on the screen.
10
Set Prices
10
Open the door (total sales).
10
Press right until the (Basic Operation).
10
Press down until (Price Info).
10
Press step right button (Price Set).
10
Press down button until the drink required is on the display then use the ( or ( buttons to alter price.
10
Then press the Jug button to exit the program and close the door.
10
To exit the program close the door and press the jug button
10
5300 Quick Reference Guide
11
When the machine is in programming mode the keypad buttons are assigned
11
the following functions:
11
1
11
2
11
3
11
4
11
5
11
6
11
7
11
8
11
9
11
0
11
Scroll (
11
Scroll (
11
Exit
11
Enter
11
Statistics
11
Press the Mode button (Audit Mode).
11
Press enter (View data)
11
Press enter (Totals- Period).
11
With Total – Period on the display
11
press enter and you can know scroll through each selection.
11
Set Prices
11
Press the Mode button (Audit Mode) press + (Supervisor Mode).
11
Press enter (Adjust Ingredients) press + (Adjust Drink Prices)
11
Press enter (Normal Prices).
11
Press enter, you can know scroll to each selection and set the price.
11
Snakky Quick Reference Guide
12
Open Door
12
Statistics
12
Press the program button (Statistics).
12
Press the E button
12
Press O twice (Statistics Display).
12
Press E (Selection Count Display).
12
Press E (Count display by selection or Total Count Display).
12
--------------------------------------------------------------------------------------------------
12
Prices
12
Enter the program (Statistics),
12
Press C (Failures).
12
Press O (Program Parameters)
12
Press E (Cash)
12
Press E (Prices)
12
Press E button. (Price Band O).
12
Press E to enter, (selection No 11flashing).
12
Choose the selection to be priced and press the E button.
12
The program will automatically move to the next selection number.
12
Failures
12
Enter the program (Statistics),
12
Press the C button the (Failures).
12
Press the E button and you have five options,
12
Failure Reading=Read any faults
12
Failure Reset=Reset any Faults
12
Motor Errors=Identify any motor faults
12
Motor Status=to read the last fault that occurred
12
Reset Motor Errors=to reset any motor faults
12
To use any of the above functions press the O button and the E button to confirm.
12
To exit the program power the machine down
12
MARINER Quick Reference Guide
13
Open Door
13
Statistics
13
Press the mode button (Audit Mode).
13
Press enter (View Data).
13
Press enter (Totals-Period or Cumulative).
13
Press enter and scroll through each selection.
13
Prices
13
Press the Mode button (Audit Mode).
13
Scroll to Supervisor Mode.
13
Press enter (Adjust Ingredients).
13
Scroll to (Adjust Drink Prices).
13
Press enter (Normal Prices),
13
Press enter you can know set the prices for all drinks.
13
Astro Quick Reference Guide
14
Open Door
14
Statistics
14
Press program button (Statistics).
14
Press button E (Statistics printing)
14
Press button 8 (statistics display)
14
Press button E (display selection counter)
14
Press button E (count display x selection)
14
SPAZIO P Quick Reference Guide
15
Open door
15
.
15
Set Prices
15
Press program button twice (Present Failures).
15
Scroll to (Set Prices).
15
Press the enter button (PRICE 1=0010).
15
Press the change data button to alter the price or
15
scroll to another price number (1-16).
15
Set Price/Selection
15
Scroll to Set Price/Selection
15
Press the enter button (Selection 17=A)
15
(A=Active D=Disabled).
15
The display will show Price 1(know assign the
15
selection to a price set in the Set Prices section and press enter).
15
-------------------------------------------------------------------------
15
Statistics
15
Press the program button twice (Present Failures).
15
Press Display Statistics button (Statistic 1).
15
Selection 1=P=0000. (P=pay F=free T=TEST)
15
-------------------------------------------------------------------------
15
Current Failures
15
Press the program button twice (Present Faults).
15
Press the confirm button to read faults.
15
Press the Reset Failure button.
15
To exit the program power the machine down
15
SPAZIO LX (RD)
16
Open door
16
Current Failures
16
Press the program button twice (Present Faults).
16
Press E to read faults.
16
To reset the faults press the number 2 button the keypad.
16
Set Prices
16
Press program button twice (Present Failures).
16
Press + (Set Prices).
16
Press the E button (PRICE 1=0010)
16
Press the O button to alter the price(Flashing) then press E.
16
Set Price/Selection
16
Scroll to (Set Price/Selection). Press E button (Selection 17=A) (A=Active D=Disabled).
16
Press the E button (Price 1)(know assign the selection to a price set in the Set Prices menu 1-14)
16
Statistics
16
Press the program button twice (Present Failures).
16
Press button 3 (Statistic 17=ON).
16
Press E (Selection 17 P=0000)(P=pay F=free T=test).
16
You can now use the + & - buttons for individual selection counts.
16
In programming mode the Spazio LX buttons have the following functions:
16
To exit the program power the machine down
16
SPAZIO Quick Reference Guides
17
Open door and insert service key
17
The programming button is located inside the main door on the coinage compartment.
17
Present Failures
17
Press the program button twice (Present Failures).
17
Press button 5 to read Faults.
17
Press button 3 on the selection panel to delete any failures.
17
Set Prices
17
Press the program button twice (Present Failures).
17
Scroll to Set Prices.
17
Press button 5 (PRICE 1=0010).
17
Press the button 6 to alter the price using the scroll buttons.
17
Set Price/Select
17
Scroll to Set Price/Selection.
17
Pressing button 5 (Button 1 = on).
17
Press button 5 (Price 1).
17
Press button 6 and a price number can now be entered from 1-14 from the set price menu.
17
Statistics
17
Press the program button twice (Failures).
17
Press button 4 on the selection panel (Statistic 1) then change to (SEL N 1 P=0000).
17
P=PAY G=GRATIS/FREE T=TEST
17
You can know scroll through each selection to retrieve vend information.
17
In programming mode the Spazio buttons have the following functions:
17
1 =Delete data/exit function5 = Confirm function/confirm data item
17
2 =Installation6 =Change data
17
3 = Failures reset7 =Statistics reset
17
4 = Statistics display8 = Statistics printout
17
To exit the program power the machine down
17
ZENITH Quick Reference Guide
18
Open door and insert service key
18
The programming button is located inside the main door on the coinage compartment
18
Prices
18
Press the program button once then the exit button (Present Failures).
18
Press the scroll button (Program Parameters).
18
Press enter (Cash).
18
Press enter (Prices)
18
Press enter (Set individual price).
18
Press enter (band 0).
18
Press enter (Selection Flashing).
18
Use the scroll buttons to select the correct price and press enter to confirm change.
18
-------------------------------------------------------------------------------------------------------------------------------
18
Statistics
18
Press the program button once (Statistics).
18
Press enter button and scroll to (Statistics display).
18
Press enter (Selection Count Display).
18
Press enter and scroll to (Total Count Display)
18
Press enter, you can know scroll through the selections for individual counts or a grand total.
18
----------------------------------------------------------------------------------------------------------------------------------------
18
Reset Failures
18
Press the program button once then the exit button (Failures).
18
Press enter choose between Read Failures and Reset Failures.
18
Press enter Read Failures or scroll to Reset Failures and press enter to delete any failures.
18
Prime Syrups
18
Press the Program button once then the Exit button (Present Failures).
18
Scroll to Test and press enter (Complete Selection) and scroll to (Unit Control)
18
Press enter (Press button Flashing).
18
To prime Syrup 1 press the 5th button down on the left hand column and press enter.
18
To prime Syrup 2 press the 5th button down on the center column and press enter.
18
SCROLLING KEYS to move to the previous or next menu.
18
Enter KEY to move from one menu to a sub menu or confirm the data on the display.
18
EXIT KEYto return from a sub menu to the higher level menu or to clear the data on display.
18
To exit the program press the program button again
18
SPRING & DUAL Quick Reference Guide
19
Open door
19
To enter the program pull out top switch located under the vend bin tray on the power box in the bottom right hand corner of the machine.
19
The front keypad of the Spring/Dual is used to enter and confirm data as follows:
19
FORWARD= 0
19
ENTER= E
19
EXIT= C
19
Statistics
19
With the top switch pulled out (Statistics)
19
Press the E button (Total Sales or Partial Sales)
19
Select option and press enter then use the O button to scroll through each selection.
19
-------------------------------------------------------------------------------------------------------------------------------
19
Pricing
19
With the top switch pulled out (Statistics).
19
Press the C button (Set Prices).
19
Press the E button (Normal prices).
19
Press E (Single price)
19
Press E the selection number will flash, enter number then the price.
19
------------------------------------------------------------------------------------------------------------------------------Failure
19
Pull top switch out (Statistics).
19
Press C button (Scroll To failures)
19
Press E then choose one of the following and press E.
19
Failure Display = Read Failures by pressing the E button
19
Failure Reset = Reset Failures by pressing the E button
19
Motor Failure Display = Display any faults that have occurred during a vend.
19
Motor Failure Reset = Resets any Motor faults.
19
To exit the program close the main door
19
SMART Quick Reference Guide
20
The front keypad of the Smart is used to enter and confirm data as follows:
20
FORWARD= 0
20
ENTER= E
20
EXIT= C
20
To access the Programming mode with the door open, press the C button and enter the 4-digit password 4231.
20
Setting Price
20
With the door open press C (enter password = 4231).
20
Scroll to set prices (Normal Prices).
20
Press E.
20
Now choose between (Global or Single price).
20
Press E. (Selection number will flash),
20
Use O button to scroll between selection numbers and prices. (Prices entered must be 3 digits i.e. 0.50).
20
-------------------------------------------------------------------------------------------------------------------------------
20
Reset Failures
20
To reset failures open main door and press the C button, enter the code 4231 and the machine will display Set Prices.
20
Scroll through to Reset Failures and press the E button twice.
20
-----------------------------------------------------------------------------------------------------------------------------
20
Statistics
20
Open the main door and the display will read Statistics,
20
Press enter and use the O button to scroll through the selections.
20
To exit the program close the main door
20
STARFOOD Quick Reference Guide
21
Open coinage door, program switch is located at the rear of this section next to the processor board.
21
Use buttons 1&2 to move up and down the menu:
21
Price Setting
21
Press the Program button (bottom Switch) twice, (Present Faults)
21
Press button 2 (program parameters)
21
Press button 3 (Prices)
21
Press button 3. (Set an Individual Price).
21
Press button 3 (Select drum).
21
Select the disk to be priced and press button 3.
21
Price will know flash and you can use buttons 1&2 to alter the price and press button 3 to confirm the change.
21
-------------------------------------------------------------------------------------------------------------------------------
21
Statistics
21
Press the program button (bottom switch)(Statistics).
21
Press button 3 (Statistics Printing) button 2 twice (Statistics Display),
21
Press button 3 (Selection Count Display).
21
Press button 3 (Total Count Display).
21
Total Count Display on the screen press button 3.
21
-------------------------------------------------------------------------------------------------------------------------------
21
Reset Failures
21
Press the program button (bottom switch) twice (Failures).
21
Press button 3 and press button 2 (Reset Failures) then press button 3.
21
To exit the program press the program button
21
ZETA Quick Reference Guide
23
Open the door of the machine in order to access t
23
1 = Programming Mode
23
2 = Read Stored Data
23
3 = Not Used
23
4 = Total Sales Data
23
5 = Free Vend
23
6 = Motor Reset
23
Set Prices
23
To set prices turn Minidip switch to the ON posit
23
Press button 1 the display (CR 1),
23
Press button 2 four times this will display the price of selection One. You can use buttons 3 & 4 to
23
Scroll to the price required.
23
Press button 2 to confirm change and move to selection 2, (press button 2 to skip to the required
23
selection).
23
Statistics
23
To read statistics turn Minidip switch 4 to the ON position, this will give a total reading of all sales.
23
Motor Reset.
23
To reset motors when the motor cams are out of position move Minidip switch 6 to the on position and close the door, this will reset the motors to the home.
23
The selection buttons on the front door of the Zeta are used to as follows:
23
Other manuals for N&W Global Vending Snakky
Installation, Use And Maintenance Manual
68 pages
Need help?
Do you have a question about the N&W Global Vending Snakky and is the answer not in the manual?
Ask a question
N&W Global Vending Snakky Specifications
General
Brand
N&W Global Vending
Model
Snakky
Category
Vending machines
Language
English
Related product manuals
N&W Global Vending Snakky RY
52 pages
Canto Plus Instant
68 pages
N&W Global Vending Colibri
68 pages
N&W Global Vending Diesis 500
60 pages
Need help?
General
To Next Page
