knob clockwise or withershins to enter [05] SQL
level setting.
˄6˅Press [MODE] key and then rotate the “DIAL”
knob clockwise or withershins to enter [06] BCLO
busy channel lockout setting.
˄7˅Press [MODE] key and then rotate the “DIAL”
knob clockwise or withershins to enter [07] LIGHT
turn on or turn off the background light.
˄8˅Press [MODE] key and then rotate the “DIAL”
knob clockwise or withershins to enter [08] SAVE to
activate power-save function.
˄9˅Press [MODE] key and then rotate the “DIAL”
knob clockwise or withershins to enter [09]K TONE
to turn on or turn off the keypad tone.
˄ 10 ˅ Press [MODE] key and then rotate the
“DIAL” knob clockwise or withershins to enter
15
[10]APO to set the automatically power off function.
˄ 11 ˅ Press [MODE] key and then rotate the
“DIAL” knob clockwise or withershins to enter
[11]TOT to set the TX time limit.
˄ 12 ˅ Press [MODE] key and then rotate the
“DIAL” knob clockwise or withershins to enter
[12]VOX to adjust the VOX function.
˄ 13 ˅ Press [MODE] key and then rotate the
“DIAL” knob clockwise or withershins to enter
[13]POWER to select high or low power output.
˄ 14 ˅ Press [MODE] key and then rotate the
“DIAL” knob clockwise or withershins to enter
[14]HLF DEV to select wide or narrow band.
16
To Next Page
Loading...
