nanoQ Mini 0903 User Manual

Download latest firmware from www.nanodashcam.com and follow update procedure.

Instructions for manual power on/off and automatic power features.

Details compatible microSD cards, FAT32 formatting, and formatting frequency.

How to start, stop, and manage video recording, including auto-start/stop.

How to enter playback, navigate, view, and manage files on the camera.

How to enter the settings menu and navigate options using buttons.

Enable/disable Wi-Fi host for mobile connection; customize SSID/password in app.

Select desired video resolution; higher resolutions use more storage.

Adjust video quality affecting grain, sharpness, and bitrate.

Configure Parking Guard for low-frame video clips when engine is off.

Configure video segment length for loop recording, or disable for continuous video.

Enable/disable motion detection to conserve storage by recording only when motion occurs.

Define G-sensor sensitivity to lock/protect recording files upon impact.

Enable/configure GPS data stamping on videos for driving track information.

Enable/configure speed data stamping on videos, requires GPS active.

Format the microSD card to FAT32, backing up important files first.

Controls camera power: short press for on/off screen, long hold for power off.

Switches video resolution or toggles Parking Guard mode with long press.

Navigates menus, zooms, enters/exits setup, or toggles MIC.

Starts/stops recording, confirms selections, or takes photos with a long press.

Navigates menus, zooms out, enters/exits playback, or locks/unlocks files.

Resets the camera by pressing POWER and UP buttons simultaneously.

Use apps (FinalCam, Youmera) for live view, setup, and playback on mobile devices.

Provides QR codes for downloading FinalCam and Youmera apps from iTunes/Google Play.