Napa 791-6570 - User Manual

6570/6600 1 06/01/01
MODEL # 791-6570
5 TON CAPACITY
MODEL # 791-6600
10 TON CAPACITY
PROFESSIONAL
SERVICE JACK
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the
manufacturer’s operating instructions and warnings before
using this service jack. Personnel involved in the use and oper-
ation of equipment shall be careful, competent, trained, and
qualified in the safe operation of the equipment and its proper
use when servicing motor vehicles and their components.
Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer’s in-
structions and warnings shall be read to and discussed with
the operator in the operator’s native language by the purchas-
er/owner, making sure that the operator comprehends its
contents.
Owner and/or user must study and maintain for future refer-
ence the manufacturer’s instructions. Owner and/or user is
responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and literature
are available from the manufacturer.
THIS IS A LIFTING DEVICE ONLY. DO NOT MOVE OR DOLLY THE
VEHICLE WHILE ON THE JACK. IMMEDIATELY AFTER LIFTING,
SUPPORT THE VEHICLE WITH APPROPRIATE MEANS.
DO NOT OVERLOAD. OVERLOADING CAN CAUSE DAMAGE TO
OR FAILURE OF THE JACK.
LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE
VEHICLE MANUFACTURER.
CENTER LOAD ON SADDLE PRIOR TO LIFTING. OFF-CENTER
LOADS MAY CAUSE DAMAGE TO JACK, LOSS OF LOAD,
PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL
SURFACES CAPABLE OF SUSTAINING THE LOAD. USE ON OTHER
THAN HARD LEVEL SURFACES CAN RESULT IN JACK INSTABILITY
AND POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE JACK SHALL BE MADE.
READ, STUDY AND UNDERSTAND THE OPERATING MANUAL
PACKED WITH THIS JACK BEFORE OPERATING.
FAILURE TO HEED THESE WARNINGS MAY RESULT IN LOSS OF
LOAD, DAMAGE TO JACK, AND/OR FAILURE RESULTING IN
PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
THIS OPERATING MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ CAREFULLY AND UNDERSTAND
ALL INFORMATION BEFORE OPERATING
TOOL. SAVE THIS MANUAL FOR FUTURE
USE.
FOR YOUR SAFETY AND TO PREVENT
INJURY:
ALWAYS SUPPORT
VEHICLE WITH
JACK STANDS.

Summary

Safety and Responsibilities

General Safety Warnings

Essential safety advice and warnings for operating the service jack.

Owner;User Responsibility

Outlines the owner's and user's obligations for safe operation and maintenance.

Operational Guide

Before Use

Instructions for preparing the hydraulic system, including purging air.

Operating Instructions

Detailed steps for safely lifting and lowering vehicles using the jack.

Inspection, Lubrication, and Maintenance

Procedures for pre-use inspection, lubrication, and hydraulic fluid maintenance.

Specifications

Technical specifications for the service jack models.

Parts Lists

Parts List for 791-6570

Detailed list of parts for the 5 Ton Capacity Professional Service Jack.

Parts List for 791-6600

Detailed list of parts for the 10 Ton Capacity Professional Service Jack.

Component Details and Troubleshooting

Hydraulic System Component Breakdown

Exploded view and parts breakdown for the hydraulic system.

Troubleshooting Common Issues

Identifies symptoms, causes, and corrective actions for jack malfunctions.

Warranty Information

Warranty Statement

Details the warranty terms, handling procedures, and limitations.

Napa 791-6570 Specifications

General

Model Number	791-6570
Brand	NAPA
Product Type	Wheel Stud
Material	Steel
Application	Automotive Wheel Fastening