To Next PageTo Next Page
Need help?Do you have a question about the Napa BK 700-2602 and is the answer not in the manual?
General| Brand | Napa |
|---|---|
| Model | BK 700-2602 |
| Category | Measuring Instruments |
| Language | English |
Essential safety guidelines for operating the multimeter, including avoiding damaged leads and grounding.
Explanation of safety symbols (WARNING, CAUTION) and voltage limit indicators used in the manual.
Identification and description of the multimeter's physical controls, buttons, and input jacks.
Defines common symbols and annunciators displayed on the multimeter for various functions and states.
Details the technical specifications including compliance, insulation, category, polarity, and auto power off.
Specifications for RPM measurement, including ranges, resolution, and accuracy for different cylinder counts.
Specifications for Dwell Angle measurement, including ranges, resolution, and accuracy for different cylinder counts.
Specifications for resistance measurements, including auto-ranging, input protection, and accuracy details.
Specifications for capacitance measurements, including auto-ranging, input protection, and accuracy details.
Specifications for frequency measurements, including auto-ranging, sensitivity, and overload protection.
Specifications for duty cycle measurements, including range, resolution, accuracy, and pulse width parameters.
Specifications for period measurements, including range, resolution, accuracy, and overload protection.
Specifications for pulse width measurements, including range, resolution, accuracy, and overload protection.
Specifications for temperature measurements using a Type K thermocouple, including range, resolution, and accuracy.
Specifications for diode testing, including test current, voltage, accuracy, and overload protection.
Specifications for audible continuity testing, including threshold, test current, and overload protection.
Step-by-step guide on how to measure AC and DC voltages using the multimeter.
Instructions for measuring AC and DC current, including cautions for the 10A scale.
Procedure for measuring Resistance, Diode, Continuity, and Capacitance, with safety warnings.
Guide on how to perform Frequency and Duty Cycle measurements using the multimeter.
Steps for measuring pulse width, focusing on signal wire connection for fuel injectors.
Instructions for measuring the period of a signal, connecting probes to ground and signal wire.
Procedure for measuring engine RPM using the tachometer function, connecting to ignition coil or signal port.
Guide on how to measure Dwell Angle for traditional ignition systems with breaker points.
Guidelines for operating the multimeter, including power off, interpreting 'OL', and normal readings on sensitive ranges.
Description of the MODE button's function for selecting measurement types like Voltage, Current, Resistance, and Capacitance.
Explanation of the RANGE button for switching between Auto-Ranging and manual range selection.
Details the Data Hold function for freezing readings and the Backlight button for display illumination.
Explains the Relative button for storing a reference value and measuring differences from it.
Describes the Hz/% Button's role in switching between Frequency and Duty Cycle measurements.
Explains the °C/°F Button for selecting temperature units between Celsius and Fahrenheit.
Instructions for safely replacing the multimeter's battery when the low battery indicator appears.
Steps for safely replacing the fuses, including selecting the correct fuse size and type.
Information regarding the one-year manufacturer warranty, coverage limitations, and repair/return instructions.
