Napoleon Arlington GDS20N User Manual

1
W415-0496 / D / 11.05.10
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
INSTALLATION AND
OPERATING INSTRUCTIONS
1.22
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 4Y8 Canada /
103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone (705)721-1212 • Fax (705)722-6031 • www.napoleonfi replaces.com • ask@napoleonproducts.com
SAFETY INFORMATION
!
WARNING
If the information in these instructions are
not followed exactly, a fi re or explosion
may result causing property damage,
personal injury or loss of life.
- Do not store or use gasoline or other fl ammable
vapors and liquids in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Immediately call your gas supplier from a
neighbour’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the
fi re department.
- Installation and service must be performed by a
qualifi ed installer, service agency or the supplier.
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI/CSA METHODS.
$10.00
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS: ANSI Z21.88, CSA 2.33 FOR VENTED GAS FIREPLACE HEATERS.
GDS20N
NATURAL GAS
GDS20P
PROPANE

Napoleon Arlington GDS20N Specifications

General

Brand	Napoleon
Model	Arlington GDS20N
Category	Stove
Language	English

Summary

Introduction

Dimensions

General Instructions

Provides essential safety and operational guidelines for using the appliance.

Rating Plate Information

Explains the details found on the appliance's rating plate, crucial for installation and safety.

Venting

Venting Lengths and Components

Specifies allowed vent lengths, components, and installation requirements for safe venting.

Typical Vent Installation

Illustrates standard methods for installing the appliance's venting system.

Special Vent Installations

Vent Terminal Clearances

Details required clearances around the vent terminal for safety and proper function.

Top Exit Horizontal Termination

Vertical Termination

Installation

Wall and Ceiling Protection

Appliance Vent Connection

Instructions for connecting the appliance to the venting system.

Horizontal Air Terminal Installation

Vertical Air Terminal Installation

Gas Installation

Provides instructions and safety warnings for connecting the gas supply to the appliance.

Mobile Home Installation

Minimum Clearance to Combustibles

Specifies required clearances from the appliance and vent pipe to combustible materials.

Optional Blower Installation

Optional Blower Installation

Operation

Lighting Instructions

Step-by-step guide for safely lighting the pilot and main burner of the appliance.

Adjustments

Pilot Burner Adjustment

Venturi Adjustment

Trouble Shooting

Troubleshooting

Guide to diagnosing and resolving common problems encountered with the appliance's operation.

Warranty

Warranty

Outlines the terms, conditions, and limitations of the appliance's limited lifetime warranty.