Napoleon RG51F/EU1 User Manual

AIR CONDITIONER
REMOTE CONTROLLER ILLUSTRATION
Thank you very much for purchasing our air conditioner.
Please read this owner's manual carefully before using
your air conditioner.
The design and specifications are subject to change without prior notice
for product improvement. Consult with the sales agency or manufacturer
for details.

Napoleon RG51F/EU1 Specifications

General

Brand	Napoleon
Model	RG51F/EU1
Category	Remote Control
Language	English

Summary

Remote Controller Specifications

Operation of Buttons

TEMP UP Button

Increase indoor temperature setting in 1°F increments up to 86°F.

TEMP DOWN Button

Decrease indoor temperature setting in 1°F increments down to 62°F.

MODE Button

Cycle through air conditioner modes: AUTO, COOL, DRY, HEAT, FAN.

SWING Button

Control horizontal louver movement or set airflow direction.

ECO Button

Activate energy-efficient mode, adjusting temperature and fan speed.

CLEAN AIR Button

Enable/disable clean air function for air purification.

RESET Button

Cancel all current settings and return to initial configuration.

LED Button

Turn the indoor screen display on or off.

ON/OFF Button

Start or stop the air conditioner operation.

FAN SPEED Button

Select fan speed among Auto, Low, Medium, and High.

TIMER ON Button

Set the auto-on timer for the air conditioner to start.

TIMER OFF Button

Set the auto-off timer for the air conditioner to stop.

LOCK Button

Lock all settings to prevent accidental changes.

TURBO Button

Activate turbo mode for rapid cooling or heating.

Indicators on LCD

Mode Display

Shows current operating mode and data transmission status.

Fan Speed Indication

Displays the selected fan speed (HIGH, MED, LOW, or AUTO).

How to Use the Buttons

Auto Operation

Set the unit to automatically select the operating mode based on room temperature.

Cooling/Heating/Fan Operation

Select COOL, HEAT, or FAN mode and set temperature and fan speed.

Dehumidifying Operation

Select DRY mode for dehumidification and set temperature.

Timer Operation

Setting the Auto-on Time

Configure the timer to automatically start the air conditioner at a set time.

Setting the Auto-off Time

Configure the timer to automatically stop the air conditioner at a set time.

Combined Timer Settings

Set both auto-on and auto-off timers simultaneously for flexible operation.

Handling the Remote Controller

Location of the Remote Controller

Guidelines for optimal placement and signal reception.

Using the Remote Controller Holder

Instructions for installing and using the optional wall-mounting holder.

Replacing Batteries

Procedure for replacing exhausted batteries and notes on battery care.